Radar Vectors
Airworthiness Directive Current Issued Jul 19, 2006 4 pages Copy saved Nov 17, 2026

AD 2006-15-02 Pilatus Aircraft Ltd. Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/C-H2, and PC-6/C1-H2 Airplanes

We are adopting a new airworthiness directive (AD) that supersedes AD 2003-09-01, which applies to certain Pilatus Aircraft Ltd (Pilatus) Model PC-6 airplanes. AD 2003-09-01 currently requires you to inspect and correct, as necessary, the aileron control bellcrank assemblies at the wing and fuselage locations. Since we issued AD 2003-09-01, the FAA determined the action should also apply to all the models of the PC-6 airplanes listed in the type certificate data sheet of Type Certificate (TC) No. 7A15 that were produced in the United States through a licensing agreement between Pilatus and Fairchild Republic Company (also identified as Fairchild Industries, Fairchild Heli Porter, or Fairchild-Hiller Corporation). In addition, the intent of the applicability of AD 2003-09-01 was to apply to all the affected serial numbers of the airplane models listed in TC No. 7A15. This AD retains all the actions of AD 2003-09-01, adds those Fairchild Republic Company airplanes to the applicability of this AD, and lists the individual specific airplane models. We are issuing this AD to detect and correct increased friction in the aileron control bellcrank assemblies, which could result in failure of the aileron flight-control system. Such failure could lead to problems in controlling flight.

Official source ↗ Official PDF ↗

14 CFR Part 39

[Docket No. FAA-2006-24092; Directorate Identifier 2006-CE-18-AD; Amendment 39-14682; AD 2006-15-02] RIN 2120-AA64

Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/C-H2, and PC-6/C1-H2 Airplanes

Agency

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

SUMMARY: We are adopting a new airworthiness directive (AD) that supersedes AD 2003-09-01, which applies to certain Pilatus Aircraft Ltd (Pilatus) Model PC-6 airplanes. AD 2003-09-01 currently requires you to inspect and correct, as necessary, the aileron control bellcrank assemblies at the wing and fuselage locations. Since we issued AD 2003-09-01, the FAA determined the action should also apply to all the models of the PC-6 airplanes listed in the type certificate data sheet of Type Certificate (TC) No. 7A15 that were produced in the United States through a licensing agreement between Pilatus and Fairchild Republic Company (also identified as Fairchild Industries, Fairchild Heli Porter, or Fairchild-Hiller Corporation). In addition, the intent of the applicability of AD 2003-09-01 was to apply to all the affected serial numbers of the airplane models listed in TC No. 7A15. This AD retains all the actions of AD 2003-09-01, adds those Fairchild Republic Company airplanes to the applicability of this AD, and lists the individual specific airplane models. We are issuing this AD to detect and correct increased friction in the aileron control bellcrank assemblies, which could result in failure of the aileron flight-control system. Such failure could lead to problems in controlling flight.

Dates

DATES: This AD becomes effective on August 23, 2006.

As of June 17, 2003 (68 FR 22582, April 29, 2003), the Director of the Federal Register previously approved the incorporation by reference of Pilatus Service Bulletin No. 27-001, dated June 5, 2002, in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

Addresses

ADDRESSES: To get the service information identified in this AD, contact Pilatus Aircraft Ltd., Customer Liaison Manager, CH-6371 Stans, Switzerland; telephone: +41 41 619 63 19; facsimile: +41 41 619 6224.

To view the AD docket, go to the Docket Management Facility; U.S. Department of Transportation, 400 Seventh Street, SW., Nassif Building, Room PL-401, Washington, DC 20590-001 or on the Internet at http://dms.dot.gov. The docket number is FAA-2006-24092; Directorate Identifier 2006-CE-18-AD.

For Further Information Contact

FOR FURTHER INFORMATION CONTACT: Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; facsimile: (816) 329-4090.

SUPPLEMENTARY INFORMATION:

Discussion

On May 3, 2006, we issued a proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an AD that would apply to all the models of the PC-6 airplanes listed in the type certificate data sheet of TC No. 7A15 that were produced in the United States through a licensing agreement between Pilatus and Fairchild Republic Company (also identified as Fairchild Industries, Fairchild Heli Porter, or Fairchild-Hiller Corporation) airplanes. This proposal was published in the Federal Register as a notice of proposed rulemaking (NPRM) on May 9, 2006 (71 FR 26891). The NPRM proposed to supersede AD 2003-09-01 (68 FR 22582, April 29, 2003), add those Fairchild Republic Company airplanes to the applicability of this proposed AD, and would list the individual specific airplane models. The NPRM proposed to retain all of the actions of AD 2003-09-01 for inspecting and correcting, as necessary, the aileron control bellcrank assemblies at the wing and fuselage locations.

Comments

Comments

We provided the public the opportunity to participate in developing this AD. We received one comment in favor of the proposed AD.

Conclusion

We have carefully reviewed the available data and determined that air safety and the public interest require adopting the AD as proposed except for minor editorial corrections. We have determined that these minor corrections:

Conclusion

• Are consistent with the intent that was proposed in the NPRM for correcting the unsafe condition; and

• Do not add any additional burden upon the public than was already proposed in the NPRM.

Costs of Compliance

We estimate that this AD affects 49 airplanes in the U.S. registry.

Costs of Compliance

We estimate the following costs to do the inspection and modifications:

Total cost per

Labor cost Parts cost airplane Total cost on U.S. operators

7 work-hours x $80 per hour = $560.. $300 $860 $860 x 49 = $42,140.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106 describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the agency's authority.

Authority for This Rulemaking

We are issuing this rulemaking under the authority described in subtitle VII, part A, subpart III, section 44701, "General requirements." Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this AD.

Regulatory Findings

Regulatory Findings

We have determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

1. Is not a "significant regulatory action" under Executive Order 12866;

2. Is not a "significant rule" under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and

3. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

We prepared a summary of the costs to comply with this AD (and other information as included in the Regulatory Evaluation) and placed it in the AD Docket. You may get a copy of this summary by sending a request to us at the address listed under ADDRESSES. Include "Docket No. FAA-2006-24092; Directorate Identifier 2006-CE-18-AD" in your request.

List of Subjects in 14 CFR Part 39

List of Subjects in 14 CFR Part 39

Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

Adoption of the Amendment

Accordingly, under the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

PART 39--AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13 [Amended]

2. FAA amends § 39.13 by removing Airworthiness Directive (AD) 2003-09-01, Amendment 39-13130 (68 FR 22582, April 29, 2003), and by adding the following new AD:

§ 39.13 [Amended]

2006-15-02 Pilatus Aircraft Ltd.: Amendment 39-14682; Docket No. FAA-2006-24092; Directorate Identifier 2006-CE-18-AD.

Effective Date

(a) This AD becomes effective on August 23, 2006.

Affected ADs

(b) This AD supersedes AD 2003-09-01, Amendment 39-13130.

Applicability

(c) This AD affects the following Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/C-H2, and PC-6/ C1-H2 airplanes that are certificated in any category:

Applicability

(1) Group 1 (maintains the actions from AD 2003-09-01): All manufacturer serial numbers (MSN) up to and including 939.

(2) Group 2: MSN 2001 through 2092.

Note: These airplanes are also identified as Fairchild Republic Company PC-6 airplanes, Fairchild Industries PC-6 airplanes, Fairchild Heli Porter PC-6 airplanes, or Fairchild-Hiller Corporation PC-6 airplanes.

Unsafe Condition

Unsafe Condition

(d) This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland that requires retaining the actions of AD 2003-09-01 and adding MSN 2001 through 2092 for all the models of the PC-6 airplanes listed in the type certificate data sheet of Type Certificate No. 7A15. We are issuing this AD to detect and correct increased friction in the aileron control bellcrank assemblies, which could result in failure of the aileron flight-control system. Such failure could lead to problems in controlling flight.

Compliance

Compliance

(e) To address this problem, you must do the following:

Actions Compliance Procedures

(1) Inspect, before removal (A) For Group 1 Follow Pilatus

of the wing bellcrank Airplanes: Within Aircraft Ltd. PC-6

assemblies, part numbers (P/ the next 100 hours Service Bulletin

N) 6132.0071.51 and time-in-service No. 27-001, dated

6132.0071.52, for installed (TIS) after June June 5, 2002.

circlips, P/N N237. 17, 2003 (the

(i) If circlips are effective date of

installed, do the actions AD 2003-09-01),

required in paragraphs unless already done.

(e)(5) and (e)(6) of this (B) For Group 2

AD. Airplanes: Within

(ii) If circlips are not the next 100 hours

installed, perform all TIS after August

actions required by 23, 2006 (the

paragraphs (e)(3), (e)(4), effective date of

(e)(5), (e)(6), and (e)(7) this AD), unless

of this AD. already done.

(2) Inspect, before removal Before further Follow Pilatus

of the fuselage bellcrank flight after the Aircraft Ltd. PC-6

assembly, P/N 6232.0118.00, inspection required Service Bulletin

assembly, P/N 6232.0118.00, inspection required Service Bulletin

for the circlip installed in paragraph (e)(1) No. 27-001, dated

on the housing to prevent of this AD. June 5, 2002.

axial movement of the bellcrank on its bearing and the flange of the housing to the rear. If the fuselage bellcrank assembly has either no circlip and/ or it is not installed as required, perform the actions in paragraphs (e)(8) and (e)(9) of this AD.

(3) Remove the wing Before further Follow Pilatus

bellcrank assemblies, P/Ns flight after the Aircraft Ltd. PC-6

6132.0071.51 and inspections Service Bulletin

6132.0071.52, and inspect required in No. 27-001, dated

for worn or damaged paragraphs (e)(1) June 5, 2002.

bearings. Replace worn or and (e)(2) of this

damaged bearings. AD, as applicable.

(4) Stake and lock the Before further Follow Pilatus

bearing in the housing of flight after the Aircraft Ltd. PC-6

the wing bellcranks, P/Ns inspections Service Bulletin

6132.0071.51 and required in No. 27-001, dated

6132.0071.52. paragraphs (e)(1) June 5, 2002.

and (e)(2) of this

AD, as applicable.

(5) Inspect the wing Before further Follow Pilatus

bellcranks control-cable flight after the Aircraft Ltd. PC-6

attachment bolts for inspections Service Bulletin

correct type and for signs required in No. 27-001, dated

of rub damage on the heads. paragraphs (e)(1) June 5, 2002.

Replace bolts that are and (e)(2) of this

damaged and/or have a total AD, as applicable. length (including head) of more than 21.5 mm (0.85 in.).

(6) Inspect the wing Before further Follow Pilatus

bellcranks support plate flight after the Aircraft Ltd. PC-6

for signs of rub damage inspections Service Bulletin

caused by the bolts. If required in No. 27-001, dated

damage is found: paragraphs (e)(1) June 5, 2002.

(i) Obtain a repair scheme and (e)(2) of this

from the manufacturer AD.

through FAA at the address specified in paragraph (f) of this AD. (ii) Incorporate this repair scheme..

(7) Reinstall wing bellcrank Before further Follow Pilatus

assemblies. flight after the Aircraft Ltd. PC-6

inspections Service Bulletin

required in No. 27-001, dated

paragraphs (e)(1) June 5, 2002.

and (e)(2) of this

AD.

(8) Remove the fuselage Before further Follow Pilatus

bellcrank assembly, P/N flight after the Aircraft Ltd. PC-6

6232.0118.00, and inspect inspections Service Bulletin

the housing for wear, required in No. 27-001, dated

damage, and signs of axial paragraphs (e)(1) June 5, 2002.

movement of the bearing in and (e)(2) of this

the housing. Replace worn AD.

or damaged bearings. If any signs of axial movement of a bearing are found: (i) Obtain a repair scheme from the manufacturer through FAA at the address specified in paragraph (f) of this AD. (ii) Incorporate this repair scheme..

(9) Reinstall the fuselage Before further Follow Pilatus

bellcrank assembly. Ensure flight after the Aircraft Ltd. PC-6

that the fuselage bellcrank inspections Service Bulletin

assembly is installed so required in No. 27-001, dated

that the surface of the paragraphs (e)(1), June 5, 2002.

bellcrank with the flange (e)(2), and (e)(8)

of the housing is installed of this AD. to the rear. The effect of this is to lock the bellcrank on the bearing tube and thus prevent movement.

(10) Do not install any (A) For Group 1 Follow Pilatus

bellcrank assemblies, P/Ns Airplanes: As of Aircraft Ltd. PC-6

6132.0071.51, 6132,0071.52, June 17, 2003 (the Service Bulletin

and 6232.0118.00 (or FAA- effective date of No. 27-001, dated

approved equivalent part AD 2003-09-01). June 5, 2002.

numbers), unless the (B) For Group 2

aileron assembly has been Airplanes: As of

inspected, modified, and August 23, 2006

installed. (the effective date

of this AD), unless

already done.

(f) Axial movement of serviceable bearings in the housings of the wing bellcranks is permitted provided no wear or damage to the bearing is found.

(g) Any sign of axial movement of a bearing in the housing of the fuselage bellcrank assembly requires that you obtain a repair scheme from the manufacturer through FAA at the address specified in paragraph (i) of this AD and incorporate the repair scheme.

(h) 14 CFR 21.303 allows for replacement parts through parts manufacturer approval (PMA). The phrase "or FAA-approved equivalent part number" in this AD is intended to signify those parts that are PMA approved through identicality to the design of the part under the type certificate and replacement parts to correct the unsafe condition under PMA (other than identicality). If parts are installed that are identical to the unsafe parts, then the corrective actions of the AD affect these parts also. In addition, equivalent replacement parts to correct the unsafe condition under PMA (other than identicality) may also be installed provided they meet current airworthiness standards, which include those actions cited in this AD.

Alternative Methods of Compliance (AMOCs)

Alternative Methods of Compliance (AMOCs)

(i) The Manager, Standards Office, ATTN: Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; facsimile: (816) 329-4090, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19.

(j) AMOCs approved for AD 2003-09-01 are approved for this AD.

Related Information

Related Information

(k) Swiss AD Number HB 2005-289, effective date August 23, 2005, also addresses the subject of this AD.

Material Incorporated by Reference

(l) You must do the actions required by this AD following the instructions in Pilatus Aircraft Ltd. PC-6 Service Bulletin No. 27-001, dated June 5, 2002.

Material Incorporated by Reference

(1) As of June 17, 2003 (68 FR 22582, April 29, 2003), the Director of the Federal Register previously approved the incorporation by reference of Pilatus Service Bulletin No. 27-001, dated June 5, 2002, in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

(2) To get a copy of this service information, contact Pilatus Aircraft Ltd., Customer Liaison Manager, CH-6371 Stans, Switzerland; telephone: +41 41 619 63 19; facsimile: +41 41 619 6224. To review copies of this service information, go to the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html or call (202) 741-6030. To view the AD docket, go to the Docket Management Facility; U.S. Department of Transportation, 400 Seventh Street, SW., Nassif Building, Room PL-401, Washington, DC 20590-001 or on the Internet at http://dms.dot.gov. The docket number is FAA-2006-24092; Directorate Identifier 2006-CE-18-AD.

Issued in Kansas City, Missouri, on July 10, 2006. Steven W. Thompson, Acting Manager, Small Airplane Directorate, Aircraft Certification Service.