Radar Vectors
Airworthiness Directive Current Issued Apr 19, 2006 4 pages Copy saved Nov 17, 2026

AD 2006-08-11 Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 Airplanes

We are adopting a new airworthiness directive (AD) for all Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 airplanes equipped with certain crew seat bucket assemblies with and without a backrest recline system. This AD requires you to replace the backrest tubes on these crew seat bucket assemblies at a specified time and adds a life limit for these backrest tubes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. We are issuing this AD to prevent cracks in the backrest tubes of certain crew seat bucket assemblies, which could result in failure of the seat system. This failure could lead to the pilot and co-pilot's reduced ability to control the airplane. This failure could also affect the proper function of the seat restrain system in the case of an emergency landing.

Official source ↗ Official PDF ↗

14 CFR Part 39

[Docket No. FAA-2004-19220; Directorate Identifier 2004-CE-27-AD; Amendment 39-14568; AD 2006-08-11] RIN 2120-AA64

Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT).

Action

ACTION: Final rule.

SUMMARY: We are adopting a new airworthiness directive (AD) for all Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 airplanes equipped with certain crew seat bucket assemblies with and without a backrest recline system. This AD requires you to replace the backrest tubes on these crew seat bucket assemblies at a specified time and adds a life limit for these backrest tubes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. We are issuing this AD to prevent cracks in the backrest tubes of certain crew seat bucket assemblies, which could result in failure of the seat system. This failure could lead to the pilot and co-pilot's reduced ability to control the airplane. This failure could also affect the proper function of the seat restrain system in the case of an emergency landing.

Dates

DATES: This AD becomes effective on June 2, 2006.

ADDRESSES: For information identified in this AD, contact Pilatus Aircraft Ltd., Customer Support Manager, CH-6371 Stans, Switzerland; telephone: +41 41 619 6208; fax: +41 41 619 7311; or Pilatus Business Aircraft Ltd., Product Support Department, 11755 Airport Way, Broomfield, Colorado 80021; telephone: (303) 465-9099; fax: (303) 465-6040.

Addresses

To view the AD docket, go to the Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street, SW., Nassif Building, Room PL-401, Washington, DC 20590-0001 or on the Internet at http://dms.dot.gov. The docket number is FAA-2004-19220; Directorate Identifier 2004-CE-27-AD.

For Further Information Contact

FOR FURTHER INFORMATION CONTACT: Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; fax: (816) 329-4090.

SUPPLEMENTARY INFORMATION:

Discussion

On February 7, 2006, we issued a proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an airworthiness directive (AD) that would apply to all Pilatus Aircraft Ltd. (Pilatus) Models PC-12 and PC-12/45 airplanes equipped with certain crew seat bucket assemblies with and without a backrest recline system. This proposal was published in the Federal Register as a notice of proposed rulemaking (NPRM) on February 14, 2006 (71 FR 7698). The NPRM proposed to require you to replace the backrest tubes on certain crew seat bucket assemblies at a specified time and add a life limit for the backrest tubes.

Comments

Comments

We provided the public the opportunity to participate in developing this AD. The following presents the comments received on the proposal and FAA's response to each comment:

Comment Issue No. 1: Remove Reference to PC12 Maintenance Manual Temporary Revision No. 04-13, Dated June 15, 2005

Comment Issue No. 1: Remove Reference to PC12 Maintenance Manual Temporary Revision No. 04-13, Dated June 15, 2005

The manufacturer states that PC-12 Interactive Electronic Technical Publication (IETP) Revision 9 (which will include Aircraft Maintenance Manual (AMM) Revision 17) will supersede PC12 Maintenance Manual Temporary Revision No. 04-13, dated June 15, 2005, by March 31, 2006, by incorporating the information into the IETP.

The commenter requests to remove the reference to PC12 Maintenance Manual Temporary Revision No. 04-13, dated June 15, 2005, from the final rule AD action.

We agree with the commenter and will change the final rule AD action.

Comment Issue No. 2: Change the Compliance Time for Replacing Certain Crew Seat Bucket Assemblies

Comment Issue No. 2: Change the Compliance Time for Replacing Certain Crew Seat Bucket Assemblies

The manufacturer states the life limit and the compliance time for replacing crew seat bucket assemblies without a recline system, part numbers (P/Ns) 959.30.01.131, 959.30.01.132, 959.30.01.133, and 959.30.01.134 (or FAA-approved equivalent P/Ns), is too conservative. The manufacturer states there have not been any of these seats found with cracks and they have confidence the life limit could be increased from 10,000 hours time-in-service (TIS) to 12,163 hours TIS.

The manufacturer requests the compliance time for initial replacement be increased from "upon the accumulation of 10,000 TIS or within the next 100 hours TIS after the effective date of the AD, whichever occurs later," to "upon the accumulation of 10,000 TIS or within the next 500 hours TIS after the effective date of the AD, whichever occurs later."

We partially agree with the commenter. Since there have not been any reported cracks on the above referenced crew seat bucket assemblies and there is confidence from the manufacturer that there is a 2,163-hour TIS "cushion," we agree that increasing the threshold compliance time from 100 hours TIS to 500 hours TIS can be done without compromising the safety of crew seat bucket assemblies with 10,000 hours or less TIS. For crew seat bucket assemblies with more than 10,000 hours TIS, we have established a compliance time for initial replacement of 100 hours TIS or upon the accumulation of 10,500 hours TIS, whichever occurs later.

We will change the final rule AD action to reflect this change.

Conclusion

Conclusion

We have carefully reviewed the available data and determined that air safety and the public interest require adopting the AD as proposed except for incorporating the concerns addressed by the commenter and minor editorial corrections. We have determined that we should incorporate the concerns addressed by the commenter, and that these minor changes:

--Are consistent with the intent that was proposed in the NPRM for correcting the unsafe condition; and --Do not add any additional burden upon the public than was already proposed in the NPRM.

Cost of Compliance

Cost of Compliance

We estimate that this AD affects 260 airplanes in the U.S. registry.

We estimate the following costs to do the replacement:

Total cost on U.S.

Labor cost Parts cost Total cost per airplane operators

3 workhours x $65 per hour = $195 per $600 per seat bucket $195 + $600 = $795 per $795 per seat bucket

seat bucket assembly. assembly. 2 seats on seat bucket assembly. assembly x 2 per

each airplane. airplane = $1,590.

$1,590 x 260 =

$413,400.

Authority for This Rulemaking

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106 describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the agency's authority.

We are issuing this rulemaking under the authority described in subtitle VII, part A, subpart III, section 44701, "General requirements." Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this AD.

Regulatory Findings

Regulatory Findings

We have determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

1. Is not a "significant regulatory action" under Executive Order 12866;

2. Is not a "significant rule" under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and

3. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

We prepared a summary of the costs to comply with this AD (and other information as included in the Regulatory Evaluation) and placed it in the AD Docket. You may get a copy of this summary by sending a request to us at the address listed under ADDRESSES. Include "Docket No. FAA-2004-19220; Directorate Identifier 2004-CE-27-AD" in your request.

List of Subjects in 14 CFR Part 39

List of Subjects in 14 CFR Part 39

Air transportation, Aircraft, Aviation safety, Safety.

Adoption of the Amendment

Accordingly, under the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

PART 39--AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13 [Amended]

2. FAA amends § 39.13 by adding the following new AD:

2006-08-11 Pilatus Aircraft Ltd.: Amendment 39-14568; Docket No. FAA-2004-19220; Directorate Identifier 2004-CE-27-AD.

Effective Date

Effective Date

(a) This AD becomes effective on June 2, 2006.

Affected ADs

(b) None.

Applicability

(c) This AD affects Models PC-12 and PC-12/45 airplanes, all serial numbers, that are equipped with the following crew seat bucket assemblies and are certificated in any category:

(1) Crew seats with a recline system, part numbers (P/N): 959.30.01.111, 959.30.01.112, 959.30.01.121, and 959.30.01.122

Applicability

(2) Crew seats without recline system, P/Ns: 959.30.01.131, 959.30.01.132, 959.30.01.133, and 959.30.01.134

Unsafe Condition

(d) This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. The actions specified in this AD are intended to prevent cracks in the backrest tubes of certain crew seat bucket assemblies, which could result in failure of the seat system. This failure could lead to the pilot and co-pilot's reduced ability to control the airplane. This failure could also affect the proper function of the seat restrain system in the case of an emergency landing.

Compliance

Compliance

(e) To address this problem, you must do the following:

Actions Compliance Procedures

(1) For crew seat bucket Initially replace upon Replace

assemblies with a recline the accumulation of following the

system, P/Ns 959.30.01.111, 5,000 hours time-in- procedures in

959.30.01.112, 959.30.01.121, service (TIS) or the applicable

and 959.30.01.122 (or FAA- within the next 100 component

approved equivalent P/Ns), hours TIS after June maintenance

replace the backrest tubes. 2, 2006 (the manual (CMM).

effective date of

this AD), whichever

occurs later, unless

already done.

Thereafter, replace

the backrest tubes

upon the accumulation

of 5,000 hours TIS

(the life limit

established in this

AD).

(2) For crew seat bucket Initially replace upon Replace

assemblies without a recline the accumulation of following the

system, P/Ns 959.30.01.131, 10,000 hours TIS or procedures in

959.30.01.132, 959.30.01.133, within the next 500 the CMM.

and 959.30.01.134 (or FAA- hours TIS after June

approved equivalent P/Ns), 2, 2006 (the

and with less than or equal effective date of

to 10,000 hours TIS replace this AD), whichever

the backrest tubes. occurs later, unless

already done.

Thereafter, replace

the backrest tubes

upon the accumulation

of 10,000 hours TIS

(the life limit

established in this

AD).

(3) For crew seat bucket Initially upon the Replace

assemblies without a recline accumulation of following the

system, P/Ns 959.30.01.131, 10,500 hours TIS or procedures in

959.30.01.132, 959.30.01.133, within the next 100 the CMM.

and 959.30.01.134 (or FAA- hours TIS after June

approved equivalent P/Ns), 2, 2006 (the

and with greater than 10,000 effective date of

hours TIS replace the this AD), whichever

backrest tubes. occurs later, unless

already done.

Thereafter, replace

the backrest tubes

upon the accumulation

of 10,000 hours TIS

(the life limit

established in this

AD).

(4) Do not install: … As of June 2, 2006 Not applicable.

(the effective date

of this AD). The life

limits specified in

paragraphs (e)(1),

(e)(2), and (e)(3) of

this AD apply to all

parts installed as

spares.

(i) Any crew seat bucket

assembly with a recline

system, P/N

959.30.01.111,

959.30.01.112,

959.30.01.121, and

959.30.01.122, (or FAA-

approved equivalent P/

Ns), with unknown hours

TIS or which has

accumulated 5,000 or more

hours TIS; or

(ii) Any crew seat bucket

assembly without a

recline system, P/N

959.30.01.131,

959.30.01.132,

959.30.01.133, and

959.30.01.134 (or FAA-

approved equivalent P/

Ns), with unknown hours

TIS or which has

accumulated 10,000 or

more hours TIS.

(5) 14 CFR 21.303 allows for Not applicable … Not applicable.

replacement parts through parts manufacturer approval(PMA). The phrase "or FAA-approved equivalent part number" in this AD is intended to signify those parts that are PMA parts approved through identicality to the design of the part under the type certificate and replacement parts to correct the unsafe condition under PMA (other than identicality). If parts are installed that are identical to the unsafe parts, then the corrective actions of the AD affect these parts also. In addition, equivalent replacement parts to correct the unsafe condition under PMA (other than identicality) may also be installed provided they meet current airworthiness standards, which include those actions cited in this AD.

(6) You must contact the type As of June 2, 2006 Not applicable.

certificate holder any time a (the effective date

certificate holder any time a (the effective date

modification or repair is of this AD).

done that affects the parts listed in paragraphs (e)(1), (e)(2), (e)(3), and (e)(4) of this AD to determine the effect, if any, the modification or repair may have on the life limits established in this AD.

Note 1: The FAA recommends that you return all replaced backrest tubes to Pilatus Aircraft Ltd., Structural Analysis Group ECE, Ch-6371 Stans, Switzerland. Include the following information: crew seat P/N and serial number, aircraft manufacturer serial number, aircraft flying hours, number of flights, and replacement date of the replaced backrest tubes.

Note 2: Pilatus PC-12 Aircraft Maintenance Manual Revision 17/ Interactive Electronic Technical Publication (IETP) Revision 9, Chapter 4, section 04-00-00, references the crew seat bucket assembly replacements.

Alternative Methods of Compliance (AMOCs)

Alternative Methods of Compliance (AMOCs)

(f) The Manager, Standards Office, Small Airplane Directorate, FAA, ATTN: Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; fax: (816) 329-4090, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19.

Related Information

Related Information

(g) Swiss AD Number HB-2005-470, Effective Date: December 30, 2005, also addresses the subject of this AD.

Issued in Kansas City, Missouri, on April 12, 2006. Kim Smith, Manager, Small Airplane Directorate, Aircraft Certification Service.