AC 65-26D Charles Taylor “Master Mechanic” Award
This revised advisory circular (AC) clarifies the administrative procedures to ensure that applications for the Charles Taylor “Master Mechanic” Award are properly submitted and processed. This revision also outlines procedures to ensure that an award recipient’s information is submitted to the Federal Aviation Administration (FAA) Safety Team (FAASTeam) National Resource Center (NRC) for inclusion in the “Roll of Honor” found on FAASafety.gov.
This document is cancelled. It may have been replaced. Check the official source before relying on it.
Federal Aviation Administration
Memorandum
Date: SEP ? 9 ?015
To: AI Spence, Directives Program Manager, ASP-11 0 ~
From: JohnS. Duncan, Director, Flight Standards Service, AFS-1{;(;/1/1
1 Prepared by: Richard Mathews, Directive Management Officer, AFS-1 40 ;<91)
Subject: Cancellation ofAdvisory Circular AC 65-26D, Charles Taylor "Master Mechanic" A ward
1 Prepared by: Richard Mathews, Directive Management Officer, AFS-1 40 ;<91)
flight Standards Service is requesting the cancellation ofthe following AC 65-26D. This AC is
being replaced by the FAASTeam Charles Taylor Master Mechanic Award "Information Guide" located on both FSlMS and www.F AASafety.gov.
AC Number Date Document Title OPR Reason for Cancellation Charles Taylor AC is replaced by the FAASTeam "Master Mechanic" Charles Taylor Master Mechanic AC 65-26D 7/2/10 Award AFS-300 Award "Information Guide".
Should you have any concerns or questions, please contact Mr. Richard Mathews, AFS-140, at (202) 267-4166.
AFS-140 AFS-1 WP:/ AFS/ A FS 11 0/CORRES/BELL/Richard MEMO