AC 33-3 Turbine and Compressor Rotors Type Certification Substantiation Procedures
Sets forth guidance and acceptable means, not the sole means, by which compliance may be shown with the turbine and compressor rotor substantiation requirements in FAR Part 33.
This document is cancelled. It may have been replaced. Check the official source before relying on it.
Federal Aviation Administration
Memorandum
Date: June 30, 2015
To: Al Spence, Directive Program Manager, Office of IT Enterprise Services, AES-200
From: Colleen M. D'Alessandro, Manager, Engine & Propeller Directorate, ANE-100
Prepared by: Robert J. Ganley, (781) 238-7110
Subject: Cancellation of AC 33-3
Purpose
This memorandum requests cancellation of AC 33-3, Turbine and Compressor Rotors Type Certification Substantiation Procedures, dated September 9, 1968. Since we issued AC 33-3 in
1968, we have introduced new requirements in 14 CFR part 33, §§ 33.27 and 33.7. We also introduced ACs 33.27-1, 33.70-1, and 33.70-2 that provide guidance for the new requirements. There will be no impact to the budget from this cancellation.
If you have any questions regarding this request, please contact Timoleon Mouzakis, at 718-238 7114.
Colleen M. D'Alessandro Manager, Engine & Propeller Directorate Aircraft Certification Service