AC 25-27 Development of Transport Category Airplane Electrical Wiring Interconnection Systems Instructions for Continued Airworthiness Using an Enhanced Zonal Analysis Procedure
This advisory circular (AC) describes the compliance process for the “Enhanced Airworthiness Program for Airplane Systems/Fuel Tank Safety (EAPAS/FTS)” rule. That rule requires design approval holders (DAH) to develop instructions for continued airworthiness (ICA) consisting of maintenance and inspection tasks, intervals and procedures for the representative airplane’s electrical wiring interconnection system (EWIS) for each affected type design. The DAH must also review any fuel tank system ICA it has developed in compliance with Special Federal Aviation Regulation (SFAR) 88 in order to ensure compatibility with the EWIS ICA, including minimizing redundant requirements. The DAH must then submit the EWIS ICA to the FAA Oversight Office for review and approval.
This document is cancelled. It may have been replaced. Check the official source before relying on it.
Development of Transport Category Airplane Electrical Wiring Interconnection Systems Instructions for Continued Airworthiness Using an Enhanced Zonal Analysis Procedure
This advisory circular (AC) describes the compliance process for the “Enhanced Airworthiness Program for Airplane Systems/Fuel Tank Safety (EAPAS/FTS)” rule. That rule requires design approval holders (DAH) to develop instructions for continued airworthiness (ICA) consisting of maintenance and inspection tasks, intervals and procedures for the representative airplane’s electrical wiring interconnection system (EWIS) for each affected type design. The DAH must also review any fuel tank system ICA it has developed in compliance with Special Federal Aviation Regulation (SFAR) 88 in order to ensure compatibility with the EWIS ICA, including minimizing redundant requirements. The DAH must then submit the EWIS ICA to the FAA Oversight Office for review and approval.