Radar Vectors
Advisory Circular Historical Issued Feb 27, 2014 AIR-110 Copy saved Nov 17, 2026

AC 21.303-3 Application For Parts Manufacturer Approval Via Tests And Computations Or Identicality

This advisory circular (AC) updates the Federal Aviation Administration’s (FAA) guidance to applicants for parts manufacturer approval (PMA) of articles via tests and computations or identicality without a license agreement. This AC cites regulations in Title 14, Code of Federal Regulations (14 CFR) part 21, Subpart K that became effective April 16, 2011. In addition, this AC provides a convenient application and compliance checklist, adds a certifying statement of compliance, provides guidance for assessing an article’s impact on safety and describes how the FAA approves replacement parts for technical standard order (TSO) articles. This AC does not apply to the articles that are listed in 14 CFR 21.9(a)(1) through (6).

This document is historical. It may have been replaced. Check the official source before relying on it.

Official source ↗

Application For Parts Manufacturer Approval Via Tests And Computations Or Identicality

This advisory circular (AC) updates the Federal Aviation Administration’s (FAA) guidance to applicants for parts manufacturer approval (PMA) of articles via tests and computations or identicality without a license agreement. This AC cites regulations in Title 14, Code of Federal Regulations (14 CFR) part 21, Subpart K that became effective April 16, 2011. In addition, this AC provides a convenient application and compliance checklist, adds a certifying statement of compliance, provides guidance for assessing an article’s impact on safety and describes how the FAA approves replacement parts for technical standard order (TSO) articles. This AC does not apply to the articles that are listed in 14 CFR 21.9(a)(1) through (6).