AC 20-99 Antiskid and Associated Systems
Provides an acceptable means, but not the only means, of complying with the requirement that anti-skid and associated systems must be designed so that no probable malfunction will result in a hazardous loss of braking or directional control of an airplane.
This document is cancelled. It may have been replaced. Check the official source before relying on it.
Federal Aviation Administration
Memorandum
Date: July 2, 2018
To: Al Spence, Directives Program Manager, ASP-110
From: Dr. Michael C. Romanowksi, Director, Policy and Innovation Division,
Aircraft Certification Service, AIR-600
Prepared by: Ken Frey, Propulsion and Mechanical Systems Section, AIR-672
Subject: Cancellation of Advisory Circular 20-99, “Antiskid and Associated Systems,” dated May 27, 1977
The FAA issued Advisory Circular (AC) 20-99, “Antiskid and Associated Systems,” dated May 27, 1977, to provide acceptable means, but not the only means, of complying with the requirement that antiskid and associated systems be designed so that no probable malfunction will result in hazardous loss of braking or directional control of an airplane.
This AC does not reflect the current guidance material and is, therefore, obsolete. The current methods of compliance on this topic are contained in AC 25.735-1, “Brakes and Braking Systems Certification Tests and Analysis,” dated April 10, 2002.
The issuance of this memorandum cancels AC 20-99. Cc: AIR DMO