Radar Vectors
Advisory Circular Cancelled Issued Jul 2, 1993 APP-400 234 pages Copy saved Nov 18, 2026

AC 150/5000-9A Announcement of Availability Report No. DOT/FAA/PP/92-5, Guidelines for the Sound Insulation of Residences Exposed to Aircraft Operations

Announces availability of Guidelines for the Sound Insulation of Residences Exposed to Aircraft Operations. Updated file includes complete report. Because of the size of the complete file, we also make it available in 8 parts for easier downloading.

This document is no longer current. Cancelled by 150/5000-9B. Check the official source before relying on it.

Official source ↗ Official PDF ↗

Text read by OCR from a scanned file (18 of 234 pages). Check the original, as some words may be misread.

U.S. Department of Transportation

Federal Aviation Administration

Advisory Circular

Subject: ANNOUNCEMENT OF A V All..ABILITY-­

REPORT NO. DOT/FAA/PP/92-5, GUIDELINES FOR THE SOUND INSULAnON OF RESIDENCES EXPOSED TO AIRCRAFT OPERA nONS

Date: 7/2/93 AC No: 150/5000-9A Initiated by: APP-510 Change:

1. PURPOSE. This advisory circular announces the availability of the report "Guidelines for the Sound Insulation of Residences Exposed to Aircraft Operations. "

2. BACKGROUND. The Federal Aviation Administration's Office of Environment and Energy and Office of Airport Planning and Programming and the Na\'al Facilities Engineering Command contracted with Wyle Research to develop a report containing guidelines for the sound insulation of residences exposed to aircraft operations. The report provides a project management handbook for studying, initiating, and implementing residential sound insulation programs in neighborhoods around military and civilian airports. The information in the report is based on fundamental acoustic principles supported by practical experience

gained in numerous residential sound insulation projects across the country. The most successful solutions to problems typically encountered in these projects have been incorporated in this report.

3. HOW TO ORDER.

a. The report may be purchased from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161 (703-487­ 4650).

h. Orders should include the complete title and order number (ADA 258032). Customers should include a check or money order made payable to the National Technical Information Service in the amount of $36.•, plus a 53.00 handling fee, for a total of 539.50. Signature of Paul GalisPAUL L. GALlS Director, Office of Airport Planning and Programming

WYLE

LA8ORA~ SCENTIFICSE~ . SYSTEMSGN)UP

LA8ORA~ SCENTIFICSE~ . SYSTEMSGN)UP

WYLE RESEARCH REPORT

WR 89-7

GUIDEUNESFOR THE SOUND INSULATION

OF RESmENCES EXPOSED TO

AIRCRAFT OPERATIONS

Prepared For:

NAVAL FACILmES ENGINEERING COMMAND Special Advisors for Planning Coordination

Alexandria. Virginia

FEDERAL AVIA'nON ADMINISTRA'nON

FEDERAL AVIA'nON ADMINISTRA'nON

Office of Environment & Energy

and Office of Airport Planning & Programming

Washington. D.C.

Prepared By:

WYLE ~EARCH 2001 Jefferson Davis Highway Arlington, Virginia 22202

(J IN 19072)

November 1989

~

Cover sheet for Report No. DOT/FAA/PP/92-5, Guidelines for the Sound Insulation of Residences Exposed to Aircraft Operations, October 1992

TABLE OF CONTENTS

TABLE OF CONTENTS

1.0 EXECurIVE SUMMARY 1-1 l.1 Introduction . . 1-1 1.2 Use ofThis Handbook. . 1-1 l.3 Dwelling Category Summary. . . . . . . 1-4 1.4 Recommended Modlftcation and Construction Practices 1-4 l.5 Dwelling Modification Packages and Costs 1-4

2.0 BASIC CONCEPTS . . . 2-1 2.1 Sound Exposure Metrics . . . . . 2-1 2.2 Noise Intrusion From Aircraft Operations 2-3 2.3 Sound Insulation Metrics . 2-3 2.4 Sound Insulation Objectives 2-5 2.5 Sound Insulation Concepts 2-6

3.0 PROJECr FORMUIATION AND ME11iODS 3-1 3.1 General Project Outline 3-1 3.2 Dwelling Categories . 3-3 3.2.1 Category Definition . 3-3 3.2.2 Geographic Distribution . . . . . 3-5 3.2.2.1 Regions of S1m1lar Dwelling Types . 3-5 3.2.2.2 1989 Housing Surveys in Selected Areas 3-7 3.2.3 Noise Reduction of Category Types 3-11 3.3 Sample Noise Monitoring . 3-13 3.3.1 Testing Methods . . . . . 3-13 3.3.2 Sound Measurement Equipment . 3-17 3.3.3 Choosing a Representative Sample 3-17 3.4 Noise Reduction Objectives 3-18 3.4.1 Criteria. . . 3-18 3.5 Sound Insulation Methods . . . . . . . 3-18 3.5.1 Evaluating Construction Materials and Methods 3-18 3.5.2 Window. Door. Roof. Wall. and Floor Modiftcations 3-19 3.5.2.1 Windows for Sound Insulation . 3-19 3.5.2.2 Doors for Sound Insulation . 3-27 3.5.2.3 Roof and Attic Treatments . . . . . . 3-29 3.5.2.4 Interior Wall Modifications for Sound Insulation 3-34 3.5.2.5 Exterior Wall Construction Improvements . 3-37 3.5.2.6 Floor Modifications. . . . . . . . 3-43 3.5.3 Building Components and Techniques for New Construction 3-45 3.5.4 Miscellaneous Features . . . . . . 3-45 3.5.4.1 Ventilation Requirements in Dwellings 3-45 3.5.4.2 Basic Ventilation Systems . . . 3-47 3.5.4.3 Bathrooms. Kitchens. and Fireplaces 3-51 3.5.5 Manufactured Homes . . . . . . . . . .. 3-51 3.5.5.1 Existing Construction and Noise Reduction Properties 3-54 3.5.5.2 Improving the Sound Insulation 3-58 3.6 Cost EsUmation . . . . . . 3-62 3.6.1 Estlmating Insulation Required . . . . . . . 3-62 3.6.2 Developing Cost Estimates From the Modifications Tables 3-95 3.6.3 Cost Development Example 3-99

4.0 PROJECf MANAGEMENf IMPIEMENfATION 4-1 4.1 Project Management . 4-1 4.l.1 Project Planning . . . 4-3 4.1.2 Detailed Cost Estimating . 4-6

1

TABlE OF CON'JENfS (Contlnued)

4.2 Plans and Specifications . 4-7 4.2.1 Work Requirements . . . 4-10 4.2.l.1 Summary of the Work 4-12 4.2.l.2 Special Provisions 4-12 4.2.l.3 Insulation . . . 4-12 4.2.l.4 Acoustical Caulklng . 4-12 4.2.1.5 Steel Acoustical Doors 4-13 4.2.l.6 Wood Acoustical Doors 4-13 4.2.l.7 Sliding Glass Doors. . . . 4-14 4.2.1.8 Aluminum Acoustical Windows . 4-14 4.2.1.9 Glazing . . . 4-15 4.2.l.10 Gypsum Drywall . 4-16 4.2.l.11 Painting. . . . . . . . . 4-16 4.2.1.12 Air Conditioning. Heating. and Ventilation 4-17 4.2.1.13 Electrical. . 4-17 4.2.2 Materials Definition . 4-18 4.2.2.1 Insulation . . 4-18 4.2.2.2 Acoustical Caulklng . 4-18 4.2.2.3 Steel Acoustical Doors 4-18 4.2.2.4 Wood Acoustical Doors 4-18 4.2.2.5 Sliding Glass Doors. . . . 4-19 4.2.2.6 Aluminum Acoustical Windows . 4-19 4.2.2.7 Glazing . . . . . . . . . . . 4-19 4.2.2.8 Gypsum Wallboard and Sound-Deadening Board 4-20 4.2.2.9 Painting. . . . . . . . . 4-20 4.2.2.10 Air Conditioning. Heating. and Ventilation 4-20 4.2.2.11 Electrical . 4-21 4.3 AdvertiSing for Bids . . . . 4-21 4.4 Contractor Selection and Approval 4-21 4.5 Scheduling. . . . . 4-22 4.6 Construction Inspections . 4-25 4.6.1 Work Supervision . 4-25 4.6.2 Inspections. . . . . 4-27 4.7 Post-Construction Noise Monitoring 4-28 4.8 Connnuntty Surveys 4-28

REFERENCES R-l

REFERENCES R-l

APPENDIX A:. AI: Preliminary Project Cost Estimates A-I A2: Detailed Dwelling Unit Costs A-3 A3: Construction Cost Summary

A5: Total Project Costs A-II

A-7 A4: Non-Construction Costs A-9

APPENDIX B: Bibliography . B-1

APPENDIX C: Home Inspection Punch Ust . C-l

APPENDIX D: Housing SUlVey FOnD (Windshield SUlVey) D-l

APPENDIX E: Glossary . E-l

APPENDIX E: Glossary . E-l

APPENDIX F: Homeowner Questionnaire F-l

APPENDIX G: Organizational Addresses G-l

u

LIST OF FIGURES

Fig. lisL.

1-1 Regions of Differing Construction Practices . 1-6 1-2 2-1 2-2 2-3

Single Noise Zone Modiftcatlon Costs Worksheet A-Weighting Versus Frequency. . . . . . . . . . . . Example of Noise Contours at BaltlmoreWashtngton International AIrport Pictorial Representation of Sound TransmJssion Through Built Construction

LIST OF FIGURES

1-43 2-1 2-2 2-7 2-4 2-5 2-6 2-7 3-1 3-2 3-3 3-4

Sound Transmission Paths Into Dwelling Interiors . . . . . . Effects ofWindow in Lowering the Composite 1L in Complex:: Constructions Conceptual illustration of Unbalanced and Balanced Constructions Measured Values for Acoustical Shielding Due to A1reraft Noise Project Implementation Flowchart . Housing Inventory Worksheet . . . Regions of Differing Construction Practices . . Schematic of Sound Measurement Instrumentation

2-8 2-10 2-11 2-13 3-2 3-4 3-6 3-15 3-5 Construction Features of Acoustical Window 3-24 3-6 3-7 Typical Acoustical Windows in Place . . . Examples of Double-Glazed. Window Constructions

3-25 3-26 3-8 Wood Acoustical Door Construction . . . 3-28 3-9 Exterior-Mounted Secondary Sliding Glass Door 3-30 3-10 Exterior Roof Improvement . 3-35 3-11 Types of Wall Modifications. . . 3-38 3-12 Schematic Exterior Wall Modifications 3-40 3-13 Schematic Exterior Wall Modifications 3-41 3-14 (a) Schematic Exterior Wall Modifications 3-42 (b) Schematic Furred Cement Board 3-42 3-15 Louver/Baftle . . . . . . . 3-44 3-16 3-17 Louver/Baffie Installed in Side of Dwelling Modified System Functions. . .

3-44 3-50 3-18 Bafile Box for Through-Wall Ventilator . 3-52 3-19 Bathroom/Kitchen Ventilator Modification . . . . . . . . . 3-53 3-20 Roof Construction of a Manufactured Unit; One-Half of Double-Wide Dwelling 3-55 3-21 Typical Manufactured Home Wall Constructions 3-56 3-22 Sample Single-Story Dwelling . . . . . . 3-63 3-23 Single Noise Zone Modiftcation Costs Worksheet . . . 3-97 3-24 Individual Dwelling Modification Cost Estimate Worksheet 3-98 3-25 Example Cost Estimate . . . . . . . . . . . . . 4-1 Possible Management Structures for Sound Insulation Program Office 4-2 Architectural Plan Details . . .

3-100 4-2 4-9 4-3 Door, Window, and Finish Schedules 4-11 4-4 Program Schedule Flowchart . 4-5 Construction Schedule Flowchart 4-24 4-26

LIST OF TABLES

LIST OF TABLES

Table

No.

1-1 Air Installation Compatible Use Zone Suggested Land-Use Guidelines . 1-2 1-2 Federal Aviation Administration Definitions of Land-Use Compatibility With Yearly Day-Night Average Sound Levels . . 1-3 1-3 EWR Ratings for Common Construction Elements. . . 1-5 1-4 Percentages of Dwellings in Each Construction Category and

1-5 1-6 1-7

Floor Constructions for Each Region . . . . 1987 Average Dwelling Size for New Construction. . . . Summary of Methods for Improving Window Sound Insulation Summary of Methods for Improving Door Sound Insulation . . .

1-7 1-7 1-8 1-8 1-8 Summary of Methods for Improving Attic and Ceiling Sound Insulation . 1-9 1-9 Summary of Methods for Improving Interior Wall Sound Insulation . 1-9 1-10 Components of Ducted Air Heating. Cooling. and Ventllation System . . . 1-11 Recommendations for Noise and Vibration Control in Residential HVAC Systems 1-12 Summary of Methods for Improving Noise Reduction in Manufactured Homes 1-13 Suggested Guidelines for Design of New Construction . . . . .

1-10 1-10 1-11 1-11 1-14 Table of Housing Configurations Used in EWR Cost Optimization Program 1-13 1-15 Most Common Dwelling Types in Each Region . 1-13 1-16 Housing Modification Description Codes . . . . . 1-14 1-17 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type A . . . . . . . . . 1-15 1-18 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type B . . . . . . . . . 1-16 1-19 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type C . . . . . . . . . 1-17 1-20 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type D . . . . . . . . . 1-18 1-21 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type E . . . . . . . . . 1-19 1-22 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-5tory House: Type F . . . . . . . . . 1-23 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• 1-20

One-Story House: Type G . . . . . . . . . 1-21 1-24 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-5tory House: Type H . . . . . . . . . 1-22 1-25 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type I. . . . . . . . . . 1-23 1-26 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type J . . . . . . . . . 1-24 1-27 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type K . . . . . . . . . 1-25 1-28 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type L . . . . . . . . . 1-29 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• 1-26

One-Story House: Type M . . . . . . . . . 1-27 1-30 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type N . . . . . . . . . 1-28 1-31 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type 0 . . . . . . . . . 1-29 1-32 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-5tory House: Type P . . . . . . . . . 1-30 1-33 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type Q 1-31

iv

UST OF ~BLES (Contlnued)

Table

t«}.

1-34 Noise Reductions. Modifications. and Cost/Dwe111ng Sq.Ft.. One-Stmy Type … House: R 1-35 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.. One-Story Type … House: S 1-36 Noise Reductions. Modifications. and Cost/Dwe111ng Sq.Ft.. One-Story Type … House: T 1-37 Noise Reductions. ModJfications. and Cost/Dwelling Sq.Ft.. Manufactured "l)'pe … Home: U 1-38 Noise Reductions. ModJfications. and Cost/Dwe111ng Sq.Ft.. Two-Story Type … Townhouse: V. 1-39 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.. Two-Story 1)rpe … Townhouse: W. 1-40 Noise Reductions. Modifications. and Cost/Dwe111ng Sq. Ft.. Two-Story "l)'pe … Townhouse: X. 1-41 Noise Reductions. Modifications. and Cost/Dwelltng Sq. Ft.. Two-StoryDwelling: Type Y … 1-39 1-42 Noise Reductions. Modifications. and Cost/Dwe111ng Sq.Ft.. Two-StoryDwelltng: 1)rpe Z … . 1-41 1-43 Cost Multiplier for Each Region. . . . . . . . . . . .

.. . . 1-42 3-1 Airports Selected for Field Study. . . . . . . . . . . . . 3-8 3-2 Percentages of Dwe111ngs in Each Construction Category and Floor Constructions for Each Region . . . . . . . . . . . . 3-8 3-3 Miscellaneous Infonnation for Each Region . . . . . . . . . . 3-9 3-4 EWR Ratings for COImnon Construction Elements. . . . . . . . . 3-12 3-5 EWR Reductlom (dB) of Doors . . . . . . . . . . . . . . 3-12 3-6 Typical STC Ratings of Acoustical Windows … 3-21 3- 7 Adjustments in STC Rating for Different Glazing Configurations. . . . . 3-22 3-8 Summary of Methods for Improving Window Sound Insulation. . . . . 3-23 3-9 Summary of Methods for Improving Door Sound Insulation. . . . . . 3-31 3-10 R-Value.1bickness. and Sound Absorption Coemcients for Fiberglass Batts . 3-33 3-11 Material Thickness and R-Value for Common Insulating Materials. . . . 3-33 3-12 Summary of Methods for Improving Attic and Ceiling Sound Insulation. . . 3-36 3-13 Summary of Methods for Improving Interior Wall Sound Insulation. . . . 3-39 3-14 Suggested Guidelines for Design of New Construction. . . . . . . .

3-46 3-15 Components of Ducted Air Heating. Cooling. and Ventilation System . . . 3-49 3-16 Recommendations for Noise and Vibration Control in Residential HVAC System 3-49 3-17 Noise Reduction Improvements in Major Habitable Rooms … . 3-59 3-18 Summary of Methods for Improving Noise Reduction in Manufactured Homes . 3-61 3-19 Table of Housing Configurations Used in EWR Cost Optlmization Program . . 3-65 3-20 Housing ModificationDescriptionCodes. … . 3-66 3-21 Noise Reductions. Modifications. and Cost/Dwelltng Sq.Ft.. One-Story Type … House: A 3-22 Noise Reductions. Modifications. and Cost/Dwe111ng Sq.Ft.. One-5toryHouse:Type B … 3-68 3-23 Noise Reductions. ModJfications. and Cost/Dwelltng Sq.Ft.. One-Story Type … House: C 3-24 Noise Reductions. Modifications. and Cost/Dwe111ng Sq.Ft.. One-Story Type … 3-70 House: D 3-25 Noise Reductions. Modifications. and Cost/Dwelltng Sq.Ft..

.

One-StmyHouse: Type E … 3-26 Noise Reductions. Modifications. and Cost/Dwe111ng Sq.Ft.. One-StoryHouse: Type F . . . . . . . . . . . . . . 3-72

v

usr OF TABLES (Contlnued)

Table

No.

3-27 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type G . . . . . . . . 3-73 3-28 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Stoty House: Type H . . . . . . . . 3-74 3-29 Noise Reductions. Mod1f1cations. and Cost/Dwelling Sq.Ft.• One-Story House: Type I. . . . . . . . . . 3-75 3-30 Noise Reductions. Modiftcat1ons. and Cost/Dwelling Sq.Ft.• One-Stoty House: Type J . . . . . . . . 3-31 Noise Reductions. Mod1f1cations. and Cost/Dwelling Sq.Ft.• One-Story House: Type K . . . . . . . . 3-32 Noise Reductions. Mod1f1cations. and Cost/Dwelling Sq.Ft.• One-Stoty House: Type L . . . . . . . . . 3-78 3-33 Noise Reductions. Modiftcations. and Cost/Dwelling Sq.Ft.• One-5toty House: Type M . . . . . . . . 3-34 Noise Reductions. Modtf1cations. and Cost/Dwelling Sq.Ft.• One-Stoty House: Type N . . . . . . . . 3-35 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Story House: Type 0 . . . . . . . . 3-36 Noise Reductions. Mod1f1cations. and Cost/Dwelling Sq.Ft.• One-Stoty House: Type P . . . . . . . 3-37 Noise Reductions.

Modtf1cations. and Cost/Dwelling Sq.Ft.• One-Story House: Type Q . . . . . . . . 3-38 Noise Reductions. Mod1f1cations. and Cost/Dwelling Sq.Ft.• One-Story House: Type R . . . . . . . . 3-39 Noise Reductions. Mod1f1cations. and Cost/Dwelling Sq.Ft.• One-Story House: Type S . . . . . . . 3-40 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• One-Stoty House: Type T . . . . . . . 3-41 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• Manufactured Home: Type U . . . . . . . . 3-87 3-42 Noise Reductions. Modificat1ons. and Cost/Dwelling Sq.Ft.• 1\vo-Story Townhouse: Type V. . . . . . 3-43 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• 1\vo-Story Townhouse: Type w … 3-44 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• 1\vo-Story Townhouse: Type X. . . . . . . . 3-45 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• 1\vo-Story Dwelling: Type Y . . . . . . 3-46 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft.• 1\vo-Story Dwelling: Type Z 3-93 3-47 Most Common Dwelling Types in Each Region. .

3-96 3-48 1987 Average Dwelling Size for New Construction . 3-96 3-49 Cost MultipUer for Each Region. . . . . . . . . . . . . 4-1 Annual Manpower Estlmates for ResIdential Sound Insulation Program Oftlce 4-2 Example Summaty of Sound Insulation Applications Based on

3-96 4-5

Generalized Specifications . . . . . 4-3 Chronological List of Project Schedule Items 4-8 4-23

vi

1.0 EXECUTIVE SUMMARY

1.0 EXECUTIVE SUMMARY

1.1 Introduction

The effect of aircraft noise on communities surrounding airfields concerns airport operators and their neJghbors. Since 1973. when the DepartmentofDefense initiated theAirInstallation Compatible Use Zones (AICUZ) Program. there has been a systematic attempt to minimize the negative impact oflocal communitygrowth on air operations and of these operations on communities. Similarly. in 1981 the FAA published Part 150 of the Federal Aviation Regulations establJsh1ng a single system of noise measurement appropriate to human response to aviation noise and identifying land uses normally compatible with various levels of noise exposure.

1.1 Introduction

Therearesubstantialmutualbenefttsinhavtng communitieslocatednearairfields. Suchbenefits include improved economic development for the community and provision of services to the air installation. However. there are also continuing problems associated with having close neJghbors. not the least of which is noise impact. Atrfteld neJghborsbecome annoyed atthe noisegenerated by flight operations and they exert pressure on airfield operators to take appropriate action to m1n1mJze the noise.

The need to safeguard military and civ1l1an flight operations must be balanced with the need to protect local residents from excessive aircraft noise exposure. This challenge can be addressed in several ways. Solutions can be directed at the noise source. bydevelopingquieteraircraftandby modifying flight procedures and flight tracks. Because military aircraft are desJgned for the performance ofspecific functions. it is not usually feasible to quiet them. Both military and cMlian airport operators. however. do consider flight procedure and flight track changes to m1n1mJze noise impact.

The alternative is to protect the community members from noise impact where they live - in their homes and other activity centers - through land-use controls and sound insulation The Navy's AICUZ program and the FAA's Land-Use Compatibility guidel1nes identify compatible land usage and encourage land-use controls. These recommendations appear in Tables 1-1 and 1-2. This guide provides a project management handbook for studying. initiating. and implementing res1dential50und1nsulationprogramsinndghborhoods around military and civilian airports.

The information presented in this guide is based on fundamental acoustic principles supported by practical experience gamed in numerous residentlal sound insulation projects across the country. The most successful solutions to problems typically encountered in these

projects have been incorporated.

The two primary goals of a residential sound insulation project are the improvement of the noise environment for community members and better relations between the installation and its neJghbors. These goals. and the methods used to achieve them. must take into account the sometimes conflicting needs of the parties concerned. The existence of federal recommendations for noise exposure provides clear-cut. objective noise goals which can be aimed toward and complied with.

1.2 Use ofThls Handbook

1.2 Use ofThls Handbook

This handbook is divided into four sections plus appendices. The Executive Summary. Section 1.0. provides an introduction to the Guidel1nes. this discussion ofhowto use the text. and a brief discussion of some of the topics covered in the handbook. Specific instructions are hJghlighted and useful data tables are reproduced from other Guidel1nes sections. Section 1.3 deSCribes dwelling categories. theirnoise reduction. and common geographic distribution patterns. Suggested dwelling type modiflcations are given in Section 1.4. A brief discussion of project costs follows in Section 1.5.

The material in the Executive Summary is a condensed version of some of the topics covered more completely in the body ofthe handbook. It is intended to provide an oveIView of the general types of sound insulation and their associated costs. It is not intended to be an adequate substitute for a full explanation of the concepts and practices involved in a home sound insulation program which Is provided in the main body of the document.

It is assumed that not all readers will need to study all parts of this document. The guidel1nes have beenstructuredtomake iteasytofind topics of particular interest to a wide variety of users. The reader is urged to become fami)jar with the background material and detailed instructions provided in the sections which apply to his or her specific needs.

Table I-II

Air Installation Compatible Use Zone Suggested Land-Use Guidelines

(Department of Defense)

Noise Zones/DNL Leyels I. Land Use,

I ' B i C.I C.2 D-I I 0.2 I: D.3 SLUCMI A No. ! Name 0.55,55151165-70- 70.7575-10 .o..sll.S~

10 Resldeali81 II Household uniu. Sinale uniu - det8ched y Y' 2.51 301 N N N 11.11 Sin ale uniu - semidetached y Y. 2.51 301 N N N 11.12 11.13 Sinale units - attached row y Y. 2,51 )01 N N N

Two units - side-by-side y Y. 2.51 )01 N N N 11.2.1 11.22 Two Units - one above the other y Y. 2S1 )01 N N N Aparlments- walk up y Y. 2,51 )01 N N N 11.31 Apartments- elevator y Y. 2,51 )01 N N N y Y. 2,51 301 N N N 11.32 12 Group qu&ners 13 Re1identialhotels y Y. 2,51 301 N N N I. Mobile home parks or count y Y. N N N N N Y. 2,51 )01 3.s1 N N IS Transient lodlinls y 16 Other re1idential y Y. 2.51 301 N N N

:0 Manafacturinc Food and kindred producu ­ 21 y y y y2 y3 y4 N manufacturing Textile mill producu ­ 22 y y y y1 y3 y4 N manufacturing 23 Apparel and other finished

producu made from

fabrics. leather. and similar materials - manuracturina y y y yI yJ y' N 24 Lumber and wood products

(except furniture) ­

y y y y1 yJ y' )II manuracturinl Furniture and fixtures ­ 2S y y y y2 y3 y4 N manufacturinl Paper and allied products ­ 26 y y y y1 yJ y4 N manufacturing 2.1 Printing. publishina. and allied

industries y y y y1 y3 y~ N Chemicals and allied producu ­ 28 y y y VI y3 y' N manufacturinl 29 Petroleum refinina and related

industries y y VI y3 y4 N y

-The desilDation or these uses u "compatible" In this zone renecu individual federal alencics' con­

sideration or Icncral cost and rcuibililY racton u well u put community experiencesand prosram objectives. Localilies. when evalualinl the application or Ihese JUideUncs to specific situations. may havc dirrcrent concerns or loais to consider. For all indication or possible community reaction 1,1 residential environmcnlS al various levels orcumulative noise, Table 0-1 in Appendix D should be consulted.

NOTES FOR TABLE %

NOTES FOR TABLE %

a) A;Jthoush l~aI conditions may requir~ residential use. it is discourased in C.l and stronsly

dlscourased In C-2. The absence or VIable aJternative development options should be deter. mined and an evaiualion indicalinSlhal a demonstrated community need ror residential use would not be met ir development were prohibited bI these lOnes should be conducted prior to approvals.

b) Where the community determines that residential uses must be allowed. measures to achieve

outdoor to indoor Noise level Reduction (NLR) or at least 2j dB (Zone C.I) and 30 dB (Zone C.2) should be incorporated into buildinl codes and be considered in individual approvals. Normal construction can be expected to provide a NLR or 20 dB. thus the reduction reo quiremcnlJ are orten staled as j. 10 or Ij dB over standard construction and normally Ulume mechanical ventilation and closed windows year round. Additional consideration should be liven 10 modiryinl NLR levels based on peak noise levels.

c) NlR criteria will nOt eliminate outdoor noise problems. However. buildin, location and

site planninl. desiln and use of berms and barrien can help mitipte outdoor noise exposure panlcularly rrom around level sourca. .\lNSU'es r~4r ~lK"r lIoue _r - sir, s~ould be used "'~"evr' procric41 ill prt/tnllcr p,orrcr illrerio' ro mtOSU'ts w~ich 011/.11 SpDcrs.

Table 1-2

Table 1-22

--- a--­

Federal Aviation Administration Definitions of Land-Use Compatibility With Yearly Day-Night Average Sound Levels

~ WIpw~ ,.Ier 10not"­ "The...~ contaWI8dWIINs 18do not constilUleI F8d8I'1Idel8mWl8b Ih8t InY .- of lendcoveredbythe pI'O9'Im it ~- « ~cepl8bl8 IIIder F8d8I'1I. 518t8. « 1oceI1ew. The r8tP0"~ lor detem**lO h 1CCep18­ ~ P8rmiIIibI8 I8td uHt Ind 11M,...~ b8tW~ ID8CIfIc ~~,. IrId -- IQH CortIoIn "'1' with lie IoceI MIttI«Iti8L FAA d8I8mwI8bon1 I6Idef PM 150 - Id WIt8rMied10 -'*"- i8d8l'1Iy del8m*18d ~ uHt lor 110M d8t~ 10 be IpproPri8I8 by IoceI dIoriti8S WI~ ~ IocIIIy de1'--;;-':;-,ac:needs 3nd vu- ~ ~~ noiM CGmPl"" ~ -. ~ TOTAeUI SlUCM- S1Ind8rd~ Ute CocIngMI~II. Y(Y..)-~ Ute r818ted compIliIIe re8tric1k)l1S. - S~ w;thouC ~(No)-lIndUNreiltedllrucu flOC - ~ be~. COI'IP8ti11e NI.R-NoiM L8Y8I A~ 10Utaa0I'10 ~) 10 be IdWY8d ttwaugh ~~""P"'.~ 01 nOit8 In-I8l1on ~ It'8 delign Ind ~ of the sIr.a... 25.~.« 35-lInd UNreliled,UUCt\K8t -.. t8rI8fIIy~1ibI8; toIdM¥8NI.A0I25.~.« 35dBmilt b.

~ted kilo d8Iign 8nd ~1IOn of sInIc NoTU ~ T~ I

(I) Where fie ~ty d8t~s lhet ~ « school UI8t mult be Glowed. ~., 10 ICtII8Y8 outdoor to ~ NOiSe I.8Y-' ~ (NLA) of II 1 25 c8 Ind ~ dB ~ be ~.Ied ~to ~ cod8I Ind be conIidered WI ~ IPIXOV8IL NormII ,.~iII conItNCtiOn tIn be expected ~ ~ I ~LR of 20 c8. UIu8. 1M reductiOn r.-ernentt - oI18n SIlled I' 5.10« 15 dB ow.- SIInd8rd C«I~.nd rl«m8ly -- ~ ven~.IIonc!OMd wWIdowI y.- round. ~. 1M - of NLA ~ .. not ~I. outdoor ~ probI-. (2)M ~ IdIi8veNLA25dB-' .. IrId~ of .,... beWIcorpor8led:tiedesign ofPOI1IonI ~ .r,.,.!fIe 1KAIRc.receiY8d.office .reI.. ,.. S8r8idwe.,..,Or"'" b norm8InollelevelIslow. (3) M ~ ~ Nl.A of ~ dB ~ be :'-.;:£.-pa-aled~!fIe dni9n - ~ of portonI of IfI8Ie buicIIIgI !fie puCic . rec8iY8d. office noiM MnIitive .,... « .".,. b /Iorm8I nOiM level . low. (.) Me 10 ~ Nt.A 35 dB -' be incorporlted WIIo1M deSign IrId ~ of portions of IheI8 ~ where !fie public . rec8ived. onIce are... ~ Mn8tiYe .,... « wh8re b norm8 I8¥8t Islow. (5)I.Ind~ compatib18 speciII reWllCWC8m8rIt - ~ ~ IY8I8fnI ml8l8d. (8)~~ ~ ~ ., NlA of 25. (7)Aelid8n'- ~ ~. In NlA of ~. (8) ~ ~ not p8f.,.jI;ed.

1..;.3

Section 2.0coversthebasicconcepts1nvolved in improving the acoustic performance of residences exposed to aircraft noise. It includes a statement of the goals of a sound insulation project. The terms and metrtcs used to describe noise levels and sound insulation are defined in this section. The paths by which sound enters a dwelling, the effects of aircraft noise intrusion. and fundamental sound insulation concepts are also described.

Section 3.0 examines project formulation and implementationmethods. This sectionaddresses issues concerned with identifying which houses need to be treated and the types of treatment available. Dwelling categories are defined and explained, and a comprehensive nationwide dwelling type data base is provided. Instructions for performing acoustic measurements are given alongwiththecriteriafor detenn1nf.ng appropriate noise reduction objectives.

Sound insulation techniques useful for the variouspartsofa dwelling arepresentedasoptions to be combined in the total dwelling treatment package. Recommended modification packages are identified along with costs to implementthem. A detailed example shows how to develop project

costs from the information provided.

Section 4.0 provides guidelines on project management and implementation, discussing programmanagementingreaterdetail. All aspects of program planning, initiation, implementation, supeIVision. andfollow-up evaluation arecovered.

Worksheets for developing detailed cost estimates are provided in AppendJx A Other appendices provide a bibliography, glossary, and sample forms for SUlVeys and Inspection.

1.3 Dwelllng category Summary

1.3 Dwelllng category Summary

The sound insulation modifications required to achieve a speciftc acoustic goal depend on the existing sound insulation characteristics of the dwelling. The existing sound insulation performance of a dwelling is determined by the

constructionmethodsandmaterialsused. aswell asthecondttionofthehome. Section 3.2explatns howtocategorize dwellings based onthese acoustically stgruftcant building features. Table 1-3, taken from Section 3.2.3 and presented here, showsthe ExternalWallRating (EWR) ofa number oftheseconstructionelements. EWRis a measure ofsound insulation capability and is explained 111 Section 2.3.

Because construction practicesvaryfrom one geographJc region to another. it is desirable to identify those that are typical in difJerent parts of the country. Figure 1-1 shows eleven regions where the housing types near major airports are

similar. Section 3.2.2 gives more information on these regions and the dwelling patterns found in them. Table 1-4 presents the results ofnational housing SUlVeys showing the most typical dwelling categories for each of the 11 regions.

Table 1-5 gives the average house size in each geographJcal region. which influences the sound insulation cost of a dwelling.

1.4 Recommended Modlfication and Construction Practices

1.4 Recommended Modlfication and Construction Practices

Section 3.5, Sound Insulation Methods. gives detailed instructions on howto modifyan existing house or alter the design of a new house to improve its sound insulation performance. There are many specific techniques used in acoustic treatments whJch must be performed properly and with careful attention to detail, in order for them to be effective. Acoustic windows. for example. must be installed according to the manufacturer's detailed instructions or their insulationperfonnancewillbeseriously degraded. In general. acoustic insulation construction requirements are strfcterthanthosenecessaryfor standard home construction. The reader is urged to study the principles and practlces of Section 3.5 for a thorough understanding of sound insulation construction.

Summary Tables 1-6 through 1-13 prOVide guidelines for improving the sound insulation performance ofdifJerent building elements. They will be useful for easy reference after the reader has become familiarwith the supportinginformation in Section 3.5.

1.5 Dwelllng Modlfication Packages and Costs

1.5 Dwelllng Modlfication Packages and Costs

Based on the compatible land-use recommendations given in Tables 1-1 and 1-2. it is possibletosetsoundinsulationgoals for dwellings exposed to aircraft noise. This involves knowing the externalnoise environment. therequirednoise reduction for residences, and the existing noise reduction of the dwelling.

Airport operators can provide mapped noise exposurecontours(Sections 2.1 and 2.2) showing

Table 1-3

EWR Ratings for Common Construction Elements

. Poor/Good Weatherstripping Condition

1-.5

Fig

ur e 1- 1

. Indicates location of airport used in

field survey described in Reference 3

Figure 1-1. Regions of Differing Construction Practices.

(Repeated as Figure 3-3.

--

Table 1-4 (Repeated as Table 3-2)

Percentages of Dwellings in Each Construction Category

and Floor Constructions for Each Region

Region and AIrport Construction I D m IV v VI VB vm Ix: x XI Category*

LAX TUB JAX PHI., LGA DNA LAN FSD SEA SAT HNL

LAX TUB JAX PHI., LGA DNA LAN FSD SEA SAT HNL

Slding/V A 15 -- 35 30 15 15 40 55 70 60 -­ " /SJL 15 35 50 45 30 20 100 " /ECL 5

Stucco IV A 80 5 -- 5 It /SJL 5 5

Brick/VA 80 15 10 5 80 10 5 35 "SJL 10 10 10 5 5 ff /SJH 15

Concrete IV A 5 -- -- 10 II /SJL 10 5 5

HC Block/VA 30 ­tt /SJL 5 ­

Slab Floor 50 100 70 15 5 -- 10 5 -- 90 100 Crawlspace 50 30 5 10 IS 70 10 Basement 80 85 85 90 95 30 . VA-Vented Attlc; LAX =Los Angeles. CA LAN=Lansing,MI SJL - Single-Joist Roof, Light; TUS :lfucson. AZ FSD =Sioux: Falls, SD SJH - Single-Joist Roof, Heavy; JAX =.Jacksonv11le. FL SEA =Seattle, WA ECL - Exposed Ceiling, Light PHL =Philadelphia. PA SAN = San Antonio, TX LGA =LaGuardia. New York. NY HNL = Honolulu, Oahu, ill BNA =Nashvtlle. TN

Table 1-5 (Repeated as Table 3-48)

1987 Average Dwelling Size for New Construction

Region I n ill IV v VI VII VIII IX x XI

Sq. Ft. 1,765 11,7651 1,80011,81511,840 11,800 11,795 1,78511,76511,800 1,765

1-7:

Table 1-6 (Repeatedas Table 3-8)

SumJrulry of Methods for Improving Window Sound Insulation

1. Increase g1aZing thickness up to 1/2 inch to increase mass and to reduce vibration. 2. Use 1am1nated glazing, typically two layers of glazing with a 30 mil polyvinyl butyralinterlayer, to achieve limpness and provide damping which reduces coincidence effects. For double-lite constructions, place the 1am1nated lite on the wann side of the window because cold climate conditions may result in loss of damping effect for the inter layer. Laminated glazing constructions can result in an increase of 3 dB in the STC rating over monolithic glazing of the same thickness. 3. Use double-lite constructions with at least a 2-inch-wide spacing between the lites. Each doubling of the airspace between the lites results in an increase of 3 dB in the STC rating. Glazing thickness should be in a ratio of 2: 1 so lites have different resonance frequencies. 4. Do not use lightweight frames where flan1dng sound paths mayltmitwindow ~t1smjg.~on loss performance. Use separate heavy aluminum frames connected together with a thermal break. 5.

Mount lites in soft neoprene edge gaskets which wrap around the bottom of the glazing sash channel. This m1nJm1zes structureborne sound transmission between the glazing and the window sash. 6. Operable double windows with separate sashes provide greater transmission loss than a single sash with double glazing. Non-operable windows have STC ratings which are 3 dB higher than operable windows of similar construction. 7. Do not evaluate windows needed to isolate low-frequency noise (such as occurs with aircraft overfljghts) based on STC ratings alone. This is because the STC rating does not include transmission loss performance below 125 Hz, where aircraft noise may be sJgniflcant. For example, single lites with STC ratings identical to double-lite constructions wt11 generally perform better at low frequencies due to their greater overall weight. Installation is crtticalin order to maintain the sound isolation performance of the window assembly. 8. Windows need to fit with a m1nJmum periIneter gap between the window frame and openJng.

All voids need to be caulked and closed off with wood trim and blocking. Ensure that all sound flanking and air infiltration paths have been closed off. Remember, if air can pass through, so can sound.

Table 1-7 (Repeatedas Table 3-9)

Surn~ry of Methods for Impro't1ng Door Sound Insulation

1. Increase the weight of the door. Th18 results in higher transmission loss characteristics. 2. Use solid-core wood doors or hollow-core metal doors filled with fibrous fill. Special acoustical wood and metal doors are available whkh can be specified for optimum results. 3. Fill hollow metal door frames with fiberglass or use solid wood door frames. Caulk around door frames at the wall. 4. Door frames and hardware should be reinforced to handle the extra wejght of acoust1cal doors. Use ball-bearing hinges and long screws for attachment to framing members. 5. Provide full seals and weatherstripping at the perimeter of the doorjamb and head to m1n1mize perimeter air fnflltration. 6. Provide a drop seal at the door bottom which makes full contact with a raJsed threshold. The drop seal should be adjustable to compensate for mIsaljgnInent of the door. 7. Vision lites should have similar transmission loss characteristics to the door. Use two layers of 1/ 4-inch lamtnated glass separated by an airspace. Provide full seals and gasketlng at the window perimeter. 8. Add a second sliding glass door in parallel with the ex:Jstlng sliding glass door. Position the new sliding glass door so it 18 a minimum of 2 inches from the ex:Jsting sliding glass door.

-8

Table 1-8 (RepeatedasTable 3-12)

Summary of Methods for Improving Attk and Ceillng Sound Insulation

1. Install bafIles on attic vents where practical. 2. Add acoustlcally absorptive material to a thkkness equal to R-19 to the attic space to reduce reverberant sound level buildup. Apply material evenly throughout the attic space. taking care to keep it away from eave vents and openings. 3. Add one layer of 5/8-inch fire-code gypsumboard to the interior ftnjgh ceiling for dormer. nonattic. lightweight. or deteriorated roofs. 4. For greater noise control in attics add SIB-inch plywood or gypsumboard to the rafters or add plywood flooring to the joists. Use absorptive material equivalent to R-19 between the rafters or joists. 5. Cover exposed beam ceilings with interior finish ceilings or partial enclosures. 6. For higher noise insulation on non-attic roofs: strip off existing exterior surface. add 3.5-inch rigid insulation assembly. 1/2-inch plywood sheathing. and new roofing material. 7. Remove whole-house attic exhaust fans and repair the interior ceiling to match the existing conditions.

Table 1-9 (Repeated as Table 3-13)

S1Jrnrn~IY of Methods for Improving Interior Wall Sound Insulation

1. Use heavy gypsumboard such as fire-rated products In SIB-inch th~kness. Adding one layer of SIB-inch gypsumboard Increases the wall S1'C rating by 3 dB. 2. Use a dJscontinuous construction between the existing wall and the new wall finish. This can be achieved by adhesive attachment of gypsumboard and sound-deadening board to the existing wall or by furring out a separate wall. Increases of 6 dB and 12 dB. respectively. to the STC rating are achieved. 3. Use lIght-gauge metal channel studs (25-gauge or lIghter) because they are less stlffthan wood or load-bearing metal studs. The use of wide (3.5-lnch) metal channel studs will Increase the transmission loss at low frequencies. 4. Use 3-lnch -thick sound -absorbing blankets In the wall cavity. Install blankets tightly between studs using friction fit or with fasteners to the studs to prevent sagging. 5. Cut new gypsum board so that it fits tightly against walls. floor. and ceillng. 6. Apply acoustical caulking around perimeter of new gypsumboard and around all electrkal outlets and switches to elJmlnate sound flanking.

Table 1-10 (Repeated asTable 3-15)

Components of Ducted Air Heating. CooImg and Ventilation System

1. Circulation fan capable of supplying the required air volume exchange through the ducting in each room. 2. For climates where heating is necessary, forced hot air heating, cooling, and ventilation capabilitles through appropriate heating and cooling coils and condenser unit. 3. Fresh air inlet located on the shaded side of the dwelling provided that side is not exposed directly to the fiJght path. It should also be adjacent to a return air plenum to facilitate mtxIng the fresh air with the recirculated air. 4. Supply and return air diffusers in each room to circulate the air. The su pply air diffusers should be adjustable to allow redirection or shut -off of the airflow. In systems without a furnace, the return plenum should be located near the ceiling to encourage recirculation of rising warm air. Furnaces have return-air plenums as part of the system. 5. Flexible ducting connecting the fan air supply vents and the return plenum to each room and to the exterior. Sheetmetal ducting should be used to provide superior sound insulation in attics and crawlspaces. 6. Control switch with on/ off and at least two fan speeds, the lower of which provides the minimum required air circulation. The switch should pennit air to be circulated without activating the heating or cooling elements. Existing radiant heat can be used as a '"backup. system.

Table 1-11 (Repeated at Table 3-16)

Recommendations for Noise and Vibration Control in Residential HVAC Systems

1. Mount the motor If an at grade level onfactory-suppUed vibration isolators to minimize vibration transmitted to the house. 2. If fans or other pieces of equipment are located in the attic, use mounting bases and vibration isolators to reduce structurebome noise and vibration transm1s.sion. Due to local building code restrktions it may not be possible in some areas to locate mechanical equipment for heating or cooling in the attic. 3. Install flexible duct connectors to lJm1t vibration transmitted to the ductwork or the dwelling structure. 4. Use of standard sheetmetal ductwork in attks and crawlspaces. Ductwork is exposed to higher levels of aircraft noise in these spaces. Do not use flexible ductwork in attic spaces since it does not have as good sound-insulating properties as standard sheetmetal. 5. Supply grilles in the rooms should be of the opposed-blade type and be designed for low noise. 6. A duct sound trap (muffier) should be installed just inside the fresh -air inlet opening. The sound trap will reduce any aircraft noise that passes through this opening and will eliminate the possibility of aircraft noise being transmitted via the duct path.

Table 1-12 (Repeated as Table 3-18)

SUDm1ary of Methods for Improving Noise Reduction in Manufactured Homes

Roofs:

1. Upgrade attic insulation to R-19. or better. where feasible. 2. Remove skylight and repair roof to existing condition. Wal1Q:

3. Add mass under exterior siding. or under interior decorative finish surface. by mounting sheathing. gypsumboard. or sound-deadening board. Windows and Doors:

4. Mount secondaJy windows and sliding gJass doors at least 2 inches away from existing elements on the dwelling exterior. 5. Replace ex:isting windows and doors with highest src rated products available. Air Infiltration Paths:

6. Seal gaps and openings in external envelope. 7. Baffie vents. 8. Repair or replace weatherstripping. 9. Check and repair seals between modular units in double and triple-wide homes. Re-level home if necessary to prevent recurring problem. Yentilation:

10. Upgrade existing system. as necessary. to provide air replenishment. circulation. heating and/ or cooling to enable homeowner to keep windows and doors closed year-round.

Table 1-13 (Repeated as Table 3-14)

Suggested Guidelines for Design of New Construction

1. Do not build homes where DNL is 75 dB or greater. 2. Orient homes on the lot so noise-sensitive areas, such as 1V rooms and bedrooms, are shielded from the flight track. 3. Use more massive external cladding, such as brick or other masonry, in place of siding wherever practical. 4. Where siding is used, or the noise exposure is high, use sound-deadening board, multi-layer gypsum board, or a furred-out interior wall construction as diSCussed in Section 3.5.2.4. 5. Use heavy roofing matertals, preferably with an attic rather than single-joiSt construction. Use R-19 or better insulating batts in the attic and R-ll to R-15 insulating batts in the walls. Use open-beam ceilings with extreme caution. 6. Use acoustical windows of an appropriate src rating, properly installed. 7. Avoid large picture windows and sliding glass doors on sides of the dwelling which face the flight track. 8. Use solid-core doors with stonn doors or, preferably, specialty acoustical doors. 9. Give careful attention to weatherstripping and seals. 10. Eliminate unnecessary openings such as through-the-wall air conditioners. vents. chimneys. skylights. and whole-house attic fans. Baffie or shield those that are used. 11. Provide aforced-airHVAC system with fresh air replenishment asdescrtbed in Section 3.5.3.2.

the expected noise levels in residential communitiesaround airfte1ds. Tables 1-1 and 1­ 2 define the requJred noise reduction for each noise Impact zone.

Theex1stlngnoisereductioncanbedetennined eitherbyacoustlcfteldmeasurements(Section 3.3) at a dwelling. or by using calculations based on the EWR and STC ratings of the building components and materials. The wall ratings in Table 1-3 cannot be used directly for these estimates because they do not account for the presence of windows or doors. STC. or Sound Transmission Class. ratings are conceptually

similar to EWR ratings. They are dJscussed in Sections 2.3 and 3.5. The noise reduction provided by different dwelling categories and various construction schemes Js given in Sections 3.2.3.3.5.1. and 3.5.2.

Twenty-six different hOUSing categories have beenidentlftedasrepresentlngmostofthecommon types of residences across the country. A computerized cost optlm1zation model has been used to identify the most cost-effective package of dwelling modifications satisfying the noise reduction goals for each house. This deSign tool was exercised for each offournoise Impact zones. The 26housingtypes are definedinTable 1-13. Of

these 26. themost commontypes found ineach of the 11 geographic regions ofthe countryare lJsted inTable 1-14. Table 1-15deflnesthemodiflcation codes used in the tables which follow it. Then Tables 1-16 to 1-41 provide. room by room. suggestedmod1ficatlonsforeachhouse. Section 3.6.1 dJscusses this information and the decisions involved in the design process.

At the bottom of each column in the modifications tables. a cost per square foot Js provided to showthe expenseoflmplementingthesuggested modifications package. This figure can be multiplied by the sJze ofthe house. in square feet ofliving space. to give the total cost ofremodeling the dwelling. Table 1-5 provides the average sJze of homes in different parts of the country.

Construction material costs and labor rates vary from one part ofthe country to another. For this reason it is desirable to find local costswhich are eqUivalent to the baseline costs given in the modifications tables. Table 1-43 gives geographiC costfactors tofacilitate calculatingthe equivalent cost in each region of the country. To use these factors. simply identify the target region. find the appropriate cost multiplier in Table 1-43. and

multiply the modification cost by this factor. Eitherthe cost persquare foot orthe whole house cost can be used for this calculation.

In order to estimate the cost of using these construction features in new construction rather than remodeling. multiply the remodeling cost by 0.70.

A sample cost development sheet Js provided here as Figure 1-2. Its use Js dJscussed in Section 3.6.3. where a full example Js provided.

To use the Single Noise Zone Modification Cost Worksheet. the following information is needed:

• GeographiCal Region - if needed to identify typical house types or sJzes rrables 1-4 and 1-15).

• Noise Exposure Zone.

• Number of Houses of each type.

• Cost to modify each type of house in given noise zone rrables 1-17 to 1-42).

• House sJze O'able 1-5. if necessary).

• GeographiCal Cost Factor (Table 1-43).

The cost to modify houses in the specified noise zone can be calculated according to the instructions in Section 3.6.

Table 1-14 (Repeated asTable 3-19)

Table of Housing Configurations Used in EWR Cost Op~mJ2~t1on Program

Table 1-1 4

Notes: VA = Vented Attic SC =Solid Core Door - Where there is a sliding glass door (SGD). SJL = Single Joist, Light HC =Hollow Core Door the other exterior door is solid core (SC). ECL = Exposed Ceiling, Light SGD = Sliding Glass Door - One side of an dwellIngs is "shielded".

usually the back side.

Table 1-15 (Repeated as Table 3-47)

Most Common Dwelling 1)1>es in Each Region

Region I n m IV v VI VIII VII IX x XI

A C M 0 0 D I 0 J K L B E R I I I 0 I I E Q Dwelling J B C T F F S D 0 J K Type. K F N D D E T F T B N M U U F N J M N D D

. Ranked from most to least conunon.

Table 1-16 (Repeated as Table 3-20)

Housing Modiftcation Description Codes

Table 1-16

-14

Table 1-17 Noise Reductions. Mod1f1catlons. and Cost/Dwelling Sq.Ft..

One-Story House: 1YPe A BgildiDg ModUlcatioDS by Noise ZOne Room Element m-~dB 66-70dB 71-73dB 78-SOdB

NRBEFORE 19.8 19.8 19.8 19.8 Door I SC+SEald RSTC35 RSTC40

Living Room

Windowl window 2 * R51'C45 RSTC45 RSTC35

RSTC45 RSTC45 Wall I Wall 2 *

STUC+MGA

STUC+MG Roof I VP+Absrp Floor I NR AFTER 19.8 24.9 30.4 34.9

NRBEFORE 21.0 21.0 21.0 21.0 WIndow 1 . 8P+STC25 RSTC35 RSTC40 Dining Room Window 2 8P+STC25 RSTC45 RSTC45 wan 1 . SIUC+2GY wan 2 STUC+MGA Roofl VP+Absrp VP+Absrp noar 1 NR AFIER 21.0 25.4 30.0 34.8

NRBEFORE 18.7 18.7 18.7 18.7 Door I SC+SEald SC+SEald RSTC40 RSTC40 Kitchen Window I RSl'C35 RSTC40 RSTC45 RSTC45 WaUl

Roof I VP+Absrp VP+Absrp Floor I NR AF1ER 24.2 24.7 28.7 29.7

NRBEFORE 23.2 23.2 23.2 23.2 WIndow 1 . RSTC35 RSTC35 RSTC35

Bedroom # 1

Wlndow2 WaD 1 .

RSTC35 RSTC40 RSTC45 SlUC+GYp WaD 2 STUC+MGA Roofl VP+Absrp VP+Absrp Floor 1 NR AF'IER 23.2 30.1 30.4 34.1

NRBEFORE 23.0 23.0 23.0 23.0 Window 1 RSTC35 RSTC40 RSTC45 Bedroom #2 Walll sroC+GYp Roofl VP+Absrp VP+Absrp Floor 1 NR AFfER 23.0 30.2 31.0 34.0

NRBEFORE 19.5 19.5 19.5 19.5 Wmdow 1 RSTC35 RSTC45 RSTC45

Library/Den wanl sroC+GYp S1UC+GYp Roofl VP+Absrp VP+Absrp Floor 1 NR AFIER 19.5 26.7 ~.5 31.5

Dw $0.34 t6.40 .10.18 $15.65

Table 1-18

Noise Reductions, Modifications, and Cost/Dwelling Sq.Ft., One-Story House: Type B Modifications by Noise Zone

Building Room Element

NR BEFORE Door 1 Window 1 Living Room Window 2 * Wall 1 Wall 2 * Roof 1 Floor 1 NR AFTER

NR BEFORE Window 1 * Window 2 Dining Room Wall 1 * Wall 2 Roof 1 Floor 1 NR AFTER

NR BEFORE Door 1 Window 1 Kitchen Wall 1 Roof 1 Floor 1 NR AFTER

NR BEFORE Window 1 * Window 2 Bedroom #1 Wall 1 * Wall 2 Roof 1 Floor 1 NR AFTER

NR BEFORE Window 1 Bedroom #2 Wall 1 Roof 1 Floor 1 NR AFTER

NR BEFORE Window 1 Library/Den Wall 1 Roof 1 Floor 1 NR AFTER Cost Per Dwelling Sq.Ft. C/D. Sq.Ft.

60-65dB

21.0

21.0

23.0

23.0

19.4

19.4

24.6

24.6

24.5

24.5

21.5

21.5

$0.00

66-70dB

21.0 SC+SEald RSTC35 RSTC35

21.0 SC+SEald RSTC35 RSTC35

25.9

23.0 RSTC40 RSTC40 STUC+GYp

28.4

19.4 SC+SE+ST RSTC35

24.8

24.6 RSTC35 RSTC35

28.1

24.5 RSTC35

28.3

21.5 RSTC35

26.4

$7.29

71-75dB

21.0 RSTC35 RSTC35 RSTC35 STUC+GYP

SJL+A+RG

31.8

23.0 RSTC35 RSTC35

SJL+A+RG

30.8

19.4 RSTC40 RSTC45

SJL+A+RG

30.0

24.6 RSTC35 RSTC35

24.6 RSTC35 RSTC35

SJL+A+RG

31.7

24.5 RSTC35

SJL+A+RG

31.9

21.5 RSTC35 STUC+GYp SJL+A+RG

30.1

$11.33

76-80dB

21.0 RSTC40 RSTC45 RSTC45 STUC+RGA STUC+RGA SJL+A+RG

35.8

23.0 RSTC45 RSTC40 STUC+2GY STUC+2GY SJL+A+RG

35.0

19.4 RSTC40 RSTC45

SJL+A+RG

30.0

24.6 RSTC40 RSTC40 STUC+RGA STUC+2GY SJL+A+RG

35.3

24.5 RSTC40 STUC+2GY SJL+A+RG

24.5 RSTC40 STUC+2GY SJL+A+RG

35.4

21.5 RSTC45 STUC+RGA SJL+A+RG

35.0

$17.46

5 dB shielding assumed.

Table 1-19 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

One-Sto House: C Table 1-1 9

Table 1-20 Noise Reductions, Modifications, and Cost/Dwelling Sq.Ft.,

One-Story House: ~ D Modiftcatlons by Noise Zone Room Element m-65dB 66-70dB 71-75dB 78-SOdB

21.5 RSTC45 STUC+RGA SJL+A+RG

NRBEFORE 21.5 21.5 21.5 21.5 Door I SC+SE+ST RSTC35 RSTC40 Window I 8G+STC25 RSTC40 RSTC45 Uving Room Window 2 * 8G+STC25 RSTC40 RSTC40 WaDI WaD 2 * BRIK+GYp BRIK+MGA

BRIK+RGA Roof I VP+Absrp VP+Absrp Floor I NRAFTER 21.5 26.9 32.0 34.6

NRBEFORE 24.1 24.1 24.1 24.1 Window 1 . RSl'C40 RSTC45 Window 2 RSl'C40 RSTC45 Dining Room Walll.

Wall2 BRIK+MGA Roofl VP+Absrp VP+Absrp Floor 1 NRAFTER 24.1 24.1 33.8 ~~

NRBEFORE 19.9 19.9 19.9 19.9 Door I SC+SEald RSTC35 RSTC40 Window I RSTC40 RSTC40 RSTC45 Kitchen Wall I

Roof I VP+Absrp VP+Absrp Floor I NR AF1ER 19.9 25.6 31.9 34.4

NRBEFORE

Window 1 . 26.2 26.2 26.2 8G+src25 26.2 RSTC40 WJndow2 8G+src25 RSTC45 Bedroom # 1 WaIll.

WaB2 Roofl VP+Absrp VP+Absrp Floor 1 NR AFIER 26.2 26.2 30.7 35.8

NRBEFORE 26.0 26.0 26.0 26.0 Window I 8G+SI'C25 RSTC40 Bedroom #2 Wall I BRIK+MG Roof I VP+Absrp VP+Absrp Floor I NR AFTER 26.0 26.0 30.5 35.0

NRBEFORE 22.7 22.7 22.7 22.7 Windowl 8G+src25 RSTC40 RSTC45

Library/Den Walll

Roofl VP+Absrp VP+Absrp Floor 1 NR AFTER 22.7 27.2 32.8 35.1 <.:ost Per Dwe Ft. $0.00 $3.23 $8.97 .12.96

Table 1-21 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

One-Story House: Type E

Table 1-21

Room

Living Room

NRBEFORE

Door 1 Windowl Window 2 * Walll Wall 2 *

Roofl Floor 1 NR AFTER

21.1

21.1

21.1 RSTC35 8G+STC25 8G+STC25 BRIK+GYp BRIK+GYp

26.3

21.1 RSTC35 RSTC40 RSTC40

21.1 RSTC35 RSTC40 RSTC40

SJLt-GYp

30.9

21.1 RSTC40 RSTC45 RSTC45 BRIK+MGA BRIK+MGA

SJL+A+RG

35.5

Dining Room

NRBEFORE

Window 1 .

Window 2 Walll.

Wall2

Roofl Floor 1 NR AF1ER

23.3

23.3

23.3 8G+S1'C25 8G+S1'C25 BRIK+2GY BRIK+GYP

26.6

23.3 RSTC35 RSTC35

SJL+GYp

~

23.3 RSTC40 RSTC40 BRIK+2GY BRIK+GYp SJL+-A+RG

23.3 RSTC40 RSTC40 BRIK+2GY BRIK+GYp SJL+-A+RG

35.5

Kitchen

NRBEFORE

Doorl Window 1

Walll

Roofl Floor 1 NR AFTER

19.6

19.6

19.6 SC+SE+ST

8G+SIC25

24.8

19.6 RSTC40 RSTC40

SJL+-GYp

31.4

19.6 RSTC40 RSTC45

SJL+A+RG

34.7

Bedroom # 1

NRBEFORE

Window 1 .

Window 2 Walll.

Wall2

Roofl Floor 1 NR AFTER

25.0

25.0

25.0

25.0

25.0 RSTC35 RSTC35

25.0 RSTC35 RSTC35

SJL+GYp

31.4

25.0 RSTC40 RSTC40 BRIK+2GY

BRIK+GYp SJL+A+RG

35.8

Bedroom #2

NRBEFORE

Window 1

Walll

Roofl Floor 1 NRAFrER

24.9

24.9

24.9

24.9

24.9 RSTC35

SJL+GYp

31.6

24.9 RSTC40 BRIK+GYp SJL+A+RG

35.9

L1braty /Den

NRBEFORE

Window I

Wall I

Roof I "oor I NRAFTER

22.1

22.1

22.1 8G+src25 BRIK+2GY

24.9 RSTC40 BRIK+GYp SJL+A+RG

25.8

22.1 RSTC35

SJLt-G Y P

30.4

22.1 RSTC40 BRIK+GYp SJL+A+RG

34.9 nU7P~~~~-;:-1 rln ~Ft Dwe_-e S~.Ft. I. 5 ~D~a;uij) Mm ~.OO ~71 $6.71 ~M $9.~ $16.50

Table 1-23 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

One-Story House: 1Ype G BuDdIng Mod1ftcatlon8 by_NO~ ~ne -- -- - : Room Element 8)-~dB 66-70dB 71-75dB 76-SOdB

22.1 RSTC40 BRIK+GYp SJL+A+RG

NRBEFORE 21.4 21.4 21.4 21.4 Door I SC+SE+ST RSTC35 RSTC35 Window I 8G+SI'C25 RSl'C40 RSIC40 Window 2 . 8G+5l'C25 RSTC35 RSIC40 Living Room Wall I WaD 2 . BRIK+GYP BRIK+GYp BRIK+2GY BRIK+2GY Roof I SJH+A+RG Floor I NR AFlER 21.4 26.3 30.8 34.6

NRBEFORE 23.8 23.8 23.8 23.8 Window 1 . 8G+STC25 RSTC35 RSTC40 Wfndow2 8G+STC25 RSTC35 RSfC35 D ining Room Wall 1 . BRIK+GVP

Wall2 BRIK+GVP

Roofl SJH+A+RG

Floor 1 NR AFTER 23.8 27.7 31.1 35.0

NRBEFORE 19.8 19.8 19.8 19.8 Door I SC+SE+ST RSTC35 RSTC40 Window I 8G+Sl'C25 RSTC35 RSTC45 Kitchen Wall I

Roof I SJH+A+RG Floor I NRAFTER ~ 25.5 29.9 35.8

NRBEFORE 25.7 25.7 25.7 25.7 Window 1 - RSTC35 RSTC40 Wlndow2 RSTC35 RSTC35 Bedroom # 1 Walll­ BRIK+GYP Wall 2 BRIK+GYP Roofl SJH+A+RG Floor 1 NR AFTER 25.7 25.7 31.4 36.1

NRBEFORE 25.6 25.6 25.6 25.6 Windowl RSTC35 RSTC35 Bedroom #2 Walll BRIK+GYP Roofl SJH+A+RG Floor 1 NR AFTER 25.6 25.6 31.6 35.6

NRBEFORE 22.5 22.5 22.5 22.5 Window I 8G+SI'C25 RSTC35 RSTC40 Ubrary/Den WaUl BRIK+GYp Roof I SJH+A+RG Floor I NR AFIER 22.5 26.6 30.4 36.1 COst Per Dw_~S!__S~.Ft.

.-21

Table 1-24 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

One-Story House: H --1Ype Sulldlng ModIBcatiODS by Noise ZOne ­

Room Element ~-mdB 66-70dB -71-75dB 78-SOdB

NRBEFORE 19.9 19.9 19.9 19.9 Doorl SC+SE+ST RSTC35 RSI'C40 Wlndowl 8P+STC25 RSTC35 RSI'C45

UvingRoom Window 2 * 8P+STC25 RSTC35 RSI'C45 Walll BRIK+GYp BRIK+GYp BRIK+GYp Wall 2 * BRIK+GYp Roofl VP+Ab+GY Floor 1 NR AFiER 19.9 25.1 29.5 36.1

NRBEFORE 21.2 21.2 21.2 21.2 Window 1 . 8P+STC25 RSTC40 RSTC45 Wlndow2 8P+STC25 RSTC35 RSTC40 Dining Room Walll. BRIK+GYp BRIK+GYp BRIK+GYp Wall 2 BRIK+GYp Roofl VP+Ab+GY Floor 1 NR AFIER 21.2 25.9 30.5 35.2

NRBEFORE 19.0 19.0 19.0 19.0 Door 1 RSTC40 RSTC35 RSTC40 Window 1 8P+STC25 RSTC35 RSTC45 Kitchen Walll

Roofl VP+Ab+GY Floor 1 NR AFIER 19.0 26.8 29.5 35.2

NRBEFORE Window I -

23.5 23.5 8P+STC25 23.5 RS1'C35

23.5 23.5 8P+STC25 23.5 RS1'C35

23.5 RSTC40 Wlndow2 8P+STC25 RS1'C35 RSTC40 Bedroom # 1 Wall I­ BRIK+GYp BRIK+GYp WaD 2 BRIK+GYp BRIK+GYp Roof I VP+Ab+GY Floor I NRAFTER 23.5 27.9 31.3 35.9

NRBEFORE 23.3 23.3 23.3 23.3 Windowl 8P+S1'C25 RSTC35 RSTC40 Bedroom #2 Walll BRIK+GYp BRIK+GYp Roofl VP+Ab+GY Floor 1 NR AFTER 23.3 27.7 31.2 35.9

NRBEFORE 19.9 19.9 19.9 19.9 Windowl 8P+STC25 RSTC40 RSTC45

Ubrary/Den Walll BRIK+GYp Roofl VP+Ab+GY Floor 1 NR AF'IER 19.9 24.6 31.9 36.1

Dw *>.00 $7.85 $8.59 .14.73

Table 1-25 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

Bui1diDgOne-Stoty House: 1YPe I bY_~o~ - i~ ~~t1~D8 ~ne - -- -

Room Element m-~dB M-70dB 71-75dB 76-SOdB

NRBEFORE 21.0 21.0 21.0 21.0 Doorl SC+SEald RSTC35 RSTC40 Windowl RS'I'C40 RSTC45 RSTC45 Uving Room Window 2 * RS'I'C40 RSTC40 RSTC45 Walll WDGY+2GY WDGY+MGA Wall 2 * WDGY+MGA Roofl VP+Ab+GY Floor 1 NR AFlER 21.0 26.0 30.2 35.7

NRBEFORE 22.4 22.4 22.4 22.4 Window I­ RSTC40 RSTC40 R51'C45 Wlndow2 RSTC45 RSTC45 R51'C45 D in1ng Room Walll­ WDGY+RGA Wall 2 WDGY +GYp WDGY+MGA WDGY+MGA Roof I VP+Ab+GY Floor I NR AF1ER 22.4 28.1 30.3 35.2

NRBEFORE 18.9 18.9 18.9 18.9 Door I RSIC35 RSTC35 RSTC40 RSTC40 Window I RSl'C40 RSTC45 RSTC45 RSTC45 Kitchen WaDI

Roof I VP+Ab+GY Floor I NR AF1ER 24.4 24.5 24.7 25.0

NRBEFORE 24.1 24.1 24.1 24.1 Window I­ RSTC40 RSTC45 Wtndow2 RSTC45 RSTC45 Bedroom # 1 Walll­ WDGY+2GY Wall 2 WDGY + RGA WDGY+MGA Roof I VP+Ab+GY Floor I NR AF1ER 24.1 24.1 30.2 35.3

NRBEFORE 24.1 24.1 24.1 24.1 Window I RSTC45 RSTC45 Bedroom #2 Wall I WDGY +GYp WDGY+MGA Roof I VP+Ab+GY Floor I NR AFTER 24.1 24.1 29.8 37.0

NRBEFORE 20.3 20.3 20.3 20.3 Window I 8G+SIC25 RSTC45 RS'I'C45

Ubrary/Den wan I WDGY +GYp WDGY + RGA WDGY +MGA Roof I VP+Ab+GY Floor I NR AF1ER 20.3 24.1 29.9 34.7 Cost~r-- Dwe .00 $7.62 $13.40 $18.15

Room

Uvtng Room

Dining Room

Kitchen

Bedroom # 1

Bedroom #2

Library/Den

Cost Per Dw elling 13.40e S Sq. Ft. .Ft.

NRBEFORE

Doorl Windowl Window 2 . Walll Wall2.

Roofl l'1oor 1 NR AFIER

NRBEFORE

Windowl­

Window2 WaD 1 -

WaD 2

Roofl Floor 1 NR AFTER

NRBEFORE

Door I Window I

Wall I

Roof I Floor I NR AFIER

NRBEFORE Window 1 .

Wmdow 2 Wall 1 .

Wall 2

Roofl Floor 1 NR AFIER

NRBEFORE

Window I

WaDI

Roof I

Floor I NR AFIE R

NRBEFORE

Window I

Wall I

Roof I Floor I NR AF1E R

I I ~ 5C/D. ~~~a~iiii) Sq.Ft. ~~~ . t> - UB'5 .

17.9 HC+WS+ST

17.9 HC+WS+ST

8P+STC25 8P+STorm

22.8

20.3

20.3

15.8 HC+WS+ST

8P+STC25

20.7

22.2

22.2

22.2

22.2

18.5 RSTC40

23.4

~.34 $3.34

.

17.9 HC+WS+ST

RSTC40 RSTC35

24.9

20.3 RSTC35 RSTC35

25.5

15.8 RSTC35 RSTC45

24.5

22.2 RSTC35 RSTC40

26.9

22.2 RSTC40

27.4

18.5 RSTC35 WDGY +GYp

26.7

~.13 tQ.13

17.9 RSTC35 RSTC45 RSTC40 WDGY +2GY

17.9 RSTC35 RSTC45 RSTC40 WDGY +2GY

30.2

20.3 RSTC40 RSTC45

WDGY+MGA

~.3

15.8 RS'I'C40 RS'I'C45

24.7

22.2 RSTC40 RSTC45

WDGY + RGA

::':>.2

22.2 RSTC45 WDGY +GYp

29.8

18.5 RSTC45 WDGY + RGA

29.9

$13.40

17.9 RSTC40 RSTC45 RSTC45 WDGY+MGA WDGY+MGA

VP+Ab+GY

35.7

20.3 RSTC45 RSTC45 WDGY +RGA WDGY +MGA

20.3 RSTC45 RSTC45 WDGY +RGA WDGY +MGA

VP+Ab+GY

35.2

15.8 RSTC40 RSTC45

VP+Ab+GY

25.0

22.2 RSTC40 RSTC45 WDGY+2GY WDGY +MGA

VP+Ab+GY

34.9

22.2 RSTC45 WDGY+MGA

VP+Ab+GY

37.0

18.5 RSTC45 WDGY+MGA

VP+Ab+GY

34.7

.18.00

Table 1-27 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

One-Story House: 1Ype Tl'­ Table 1-2 7

18.5 RSTC45 WDGY+MGA

1-2'

Table 1-28 Noise Reductions. Modifications. and Cost/Dwelling

I Room

Living Room

Dining Room

Kitchen

Bedroom # 1

Bedroom #2

Library/Den

(..;ost Per Dwellin

One-Story House: 1Ype L B!!lldlng-

Element

NRBEFORE

Doorl Windowl Window 2 *

Walll Wall 2 *

Roofl 1'1oor 1 NR AFIER

NRBEFORE

Window 1 . Window2 wan 1 .

wan 2

Roofl Floor 1 NR AFIER

NRBEFORE

Door I Window I

Wall I

Roof I Floor I NR AFTER

NRBEFORE

WIndow 1 . Wlndow2 Walll .

Wall 2

Roofl Floor 1 NR AFIER

NRBEFORE

Window I

wan I

Roof I Floor I NR AF1ER

NRBEFORE

Window I

Wall I

Roof I F1oor I NR AF'IER

~-~dB!

16.2 SG+ WStrp

16.2 SG+ WStrp

Rsrc35 Rsrc3O

ELt+GYp

23.2

16.5 RSI'C3O RSI'C3O

EU+GYp

22.5

15.7 SC+WStrp

RSl'C40

ELt+GYp

20.4

17.9 RSTC3O RSTC35

ELt+GYp

24.2

17.8 Rsrc3O

ELt+GYp

23.6

15.2 RSI'C3O

EU+GYp

20.6

.39

~Odlflcatlon.

66-70dB

16.2 SG+WS+SG

RSTC45 RSTC35 WDGY +GYp

EU+GYp

25.8

16.5 RSTC35 RSTC45

16.5 RSTC35 RSTC45

WDGY +GYp

Elt. +GYp

25.3

15.7 RSTC40 RSTC45

EU+GYp

23.4

17.9 RSTC3O RSTC45

WDGY +GYp

ELt+GYp

25.2

17.8 RSTC45 WDGY +GYp

ELt+GYp

26.4

15.2 RSTC45 WDGY+2GY

ELt+GYp

25.7

$10.27

Sq.Ft..

by Noise ZOne

-71-75dB

16.2 SG+WS+SG

RSTC45 RSTC45 WDGY+MGA

WDGY + RGA

EL+Ab+GY

29.9

16.5 RSTC40 RSTC45 WDGY+2GY WDGY+MGA

16.5 RSTC40 RSTC45 WDGY+2GY WDGY+MGA

EL+Ab+GY

30.5

15.7 RSTC40 RSTC45

EL+Ab+GY

24.3

17.9 RSTC40 RSTC45 WDGY +GYp WDGY+MGA

EL+- Ab+ G Y

30.2

17.8 RSTC45 WDGY+MGA

EL+Ab+GY

31.5

15.2 RSTC45 WDGY+MG

EL+Ab+GY

29.5

$18.15

76-SOdB

16.2 SG+WS+SG

R5IC45 R5IC45 WDGY+MGA WDGY +MGA

ELtoS~B

33.6

16.5 RSTC45 RSTC45 WDGY+MGA WDGY+MGA

16.5 RSTC45 RSTC45 WDGY+MGA WDGY+MGA

EL+S~ B I

36.0

15.7 RSTC40 RSTC45

EL+S~ B

25.0

17.9 RSTC40 RSTC45 WDGY+MG WDGY+MGA

ELfoS}X:B

35.6

17.8 RSTC45 WDGY+MG

ELfoSjx: B

35.1

15.2 RSTC45 WDGY +MGA

EL+S~ B

34.6

$22.77

Living Room

Dining Room

Kitchen

Bedroom # 1

Bedroom #2

Libraty IDen

I CosfPer I Dwelling Sq. Ft.

NRBEFORE

15.2 RSTC45 WDGY +MGA

Door I Window I WIndow 2 .

Wall I Wall2.

Roof I Floor I NR AFIER

NRBEFORE

Window I . Wfndow2

Wall I.

Wall2

Roof I 1'1oorI NR AFIER

NRBEFORE

Door I WJndowl

Wall I

Roof I Floor I NR AFlER

NRBEFORE

Window I­ Window2

Walll-

Wall 2

Roof I f1oor I NR AFiER

NRBEFORE

Window I

Wall I

Roof I Floor I NR AFIER

NRBEFORE

Window I

WaDI

Roof I Floor I NR AF1E R

C/D. Sq.Ft.

19.5

19.5

20.3

20.3

18.1 RSl'C35 8P+STC25

18.1 RSl'C35 8P+STC25

23.0

22.3

22.3

22.2

22.2

18.5 Rsrc40

23.5

$0.72

19.5 RSTC35 RSTC40

25.0

20.3 RSTC35 RSTC35

25.6

18.1 RSTC40 RSTC40

24.7

22.3 RSTC35 RSTC40

27.0

22.2 RSTC35

26.8

18.5 RSTC35 WDGY +GYp

24.9

Ii $8.00

19.5 RSTC35 RSTC45 RSTC40 WDGY+2GY

~.4

~.3 RSTC40 RSTC45

WDGY+MGA

~.3 RSTC40 RSTC45

30.5

18.1 RSTC40 RSTC45

24.8

22.3 RSTC35 RSTC45

WDGY + RGA

30.1

22.2 RSTC45 WDGY +GYp

30.0

18.5 RSTC45 WDGY + RGA

~.1

.13.24

19.5 RSTC40 RSTC45 RSTC45 WDGY+MGA

WDGY +MG

VP+Absrp

35.2

20.3 RSTC45 RSTC45 WDGY+RGA WDGY+MGA

VP+Absrp

35.0

18.1 RSTC40 RSTC45

VP+Absrp

25.0

22.3 RSTC40 RSTC45 WDGY+MG WDGY+MGA

22.3 RSTC40 RSTC45 WDGY+MG WDGY+MGA

VP+Absrp

35.6

22.2 RSTC45 WDGY+MGA

VP+Absrp

36.7

18.5 RSTC45 WDGY+MGA

VP+Absrp

35.4

.17.00 . 5 dBSh ie1dmg assumed.

Table 1-30 Noise Reductions. Modifications. and Cost/Dwel1tng Sq.Ft..

One-Story House: Type N Bui1d1D& ModUlcationa by Noise Zon4 I

. 5 dB shielding assumed.

Ta

ble 1-30

18.5 RSTC45 WDGY+MGA

Table 1-31 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

One-Stoty House: ~ 0

Room

, I

~~~ Element

I

i 8)-~dB ModifIcations

II 66-70dB by Noise Zone

II -71-'1SdB 78-SOdB

Living Room

NRBEFORE

Door I Window I WIn<kJW2 .

WaDI Wall2.

Roof I Floor I NR AFIER

20.6

20.6

20.6 SC+SE+ST

RSTC45 RSTC35

RSTC45 RSTC35

SJL+GYp

26.2

20.6 RSTC35 RSTC45 RSTC40 WDGY+MGA

WDGY +GYp

SJL+GYp

00.1

20.6 RSTC40 RSTC45 RSTC45 WDGY+MGA WDGY+MGA

SJL+A+RG FB+A+STd

34.9

Dining Room

NRBEFORE

Window 1 . Wlndow2 waD 1 .

WaD2

Roofl 1'1oor 1 NR AF1ER

21.9

21.9

21.9 RSTC40 RSTC45

WDGY+2GY

SJL+GYp

28.3

21.9 RSTC40 RSTC45 WDGY +GYp WDGY+MGA

21.9 RSTC40 RSTC45 WDGY +GYp WDGY+MGA

SJL+GYp

30.3

21.9 RSTC45 RSTC45 WDGY+MGA WDGY +MGA

SJL+A+RG FB+A+STd I'

35.4

NRBEFORE

Door I Window I

18.6 RSTC35 RSTC45

18.6 RSTC40 RSTC45

18.6 RSTC40 RSTC45

18.6 RSTC40 RSTC45 Kitchen WaUl

Roof I floor I NR AFTER 23.7

SJL+GYp

24.4

SJL+GYp

23.9

SJL+A+RG FB+A+STd

SJL+A+RG FB+A+STd

24.9

Bedroom # 1

NRBEFORE

Window I -

Window 2

Wall I-

Wall 2

Roof I floor I NR AF1ER

23.3

23.3

23.3 RSTC45 RSTC45 WDGY +GYp WDGY +GYp

SJL+GYp

28.6

23.3 RSTC35 RSTC45 WDGY +GYp WDGY+MGA

SJL+GYp

30.2

23.3 RSTC45 RSTC45 WDGY+MG WDGY+MGA

SJL+A+RG FB+A+STd

35.4

Bedroom #2

NRBEFORE

Window I

wan I

Roof I f1oor I NR AF1ER

23.3

23.3

23.3 RSTC45 WDGY+2GY

23.3 RSTC45 WDGY+2GY

SJL+GYp

28.9

23.3 RSTC45 WDGY+2GY

SJL+GYp

30.3

23.3 RSTC45 WDGY+MGA

SJL+A+RG FB+A+STd

36.0

Library IDen

NRBEFORE

Window I

WaUl

Roof I Floor I NR AFIER

20.0

20.0

20.0 RSTC40 WDGY +GYp

SJL+GYp

25.5

20.0 RSTC45 WDGY+MGA

SJL+GYp

31.1

20.0 RSTC45 WDGY+MGA

SJL+A+RG FB+A+STd

SJL+A+RG FB+A+STd

34.1

(..;0 II DweWn $1.10 $13.45 $16.28 ~.34

I

Table 1-32 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

One-Story House: Type P aun4ing MoaIftcatiODS by Noise ZOne Room Element ~-~CIB 66-70cIB 71-~dB 78-s)cIB

NRBEFORE 18.4 18.4 18.4 18.4 Doorl SC+SE+ST RSTC35 RSTC40 RSTC4O Wmdow 1 8G+Sl'C25 RSTC35 RSTC45 RSTC45 Uving Room Wmdow2. 8G+Sl'C25 WDGY +GYp RSTC40 RSTC45 Walll WDGY +MG Wall2. WDGY +MG Roofl EL+Ab+GY EL+Ab+GY EL+Ab+GY EL+SpcB F1oor 1 NR AFIER 24.8 26.0 29.6 34.8

NRBEFORE 19.4 19.4 19.4 19.4 WIndow 1 . 8G+5rc25 RSTC35 RSTC45 RSTC45 WJndow2 8G+5rc25 RSTC35 RSTC45 RSTC40 WaD 1 . WDGY +GYp WDGY + RGA WDGY+MGA DiningRoom WaD 2 WDGY +2GY WDGY+MGA Roofl ELfoAb+GY EL+Ab+GY EL+Ab+GY EL+SIX B F1oor 1 NR AFTER 24.4 26.1 29.7 35.5

NRBEFORE 17.2 17.2 17.2 17.2 Doorl SC+SE+ST RSTC40 RSTC40 RSTC40 Wlndowl 8G+STC25 RSTC45 RSTC45 RSTC45 Kitchen Walll

Roofl EL+Ab+GY EL+Ab+GY EL+Ab+GY ELt-S}XB l'1oor 1 NR AF'IER 22.3 24.3 24.3 25.0

NRBEFORE 19.9 19.9 19.9 19.9 WIndow . 1 8G+STC25 RSTC35 RSIC45 RSTC45 Wtndow2 8G+STC25 RSTC35 RSIC45 RSTC45 wan 1 . Bedroom # 1 WDGY + RGA WDGY+MG wan 2 WDGY +2GY WDGY+MG Roofl EL+Ab+GY EL+Ab+GY EL+Ab+GY EL+SJx:B F1oor 1 NR AFIER 25.4 26.3 29.8 34.7

NRBEFORE 20.0 20.0 20.0 20.0 Window 1 8G+STC25 RSTC35 RSTC45 RSTC45 Bedroom #2 Walll WDGY + RGA WDGY+MG Roofl EL+Ab+GY EL+Ab+GY EL+Ab+GY EL+S~B F1oor 1 NR AFIER 25.6 26.6 30.5 35.0

NRBEFORE 18.1 18.1 18.1 18.1 Window I 8G+5rc25 RSrC35 RSTC45 RSTC45 WDGY +MGA Library/Den WaUl WDGY+GYp WDGY+MGA Roof I EL+Ab+GY EL+Ab+GY EL+Ab+GY EL+S~ B Floor I NR AF1E R 22.1 25.3 30.9 35.2 L:ost Per Dw 74 *11.34 *18.04 $22.~

- - -

Table 1-33 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

Room

Living Room

D 1n1ng Room

Kitchen

Bedroom # 1

Bedroom #2

Libraty/Den

co~Per Dwellin~ Sq.Ft.

One-Story House: ~ Bui1dIDg~ Element

NRBEFORE

Doorl Wmdowl Window 2 . Walll Wall2.

Roofl Floor 1 NR AFIER

NRBEFORE

Window 1 . Window2 Wall 1 .

Wall 2

Roofl Floor 1 NR AFTER

NRBEFORE

Doorl Windowl

WaDl

Roofl f1oor 1 NR AFIER

NRBEFORE

WJndow 1 . Window2 wan 1 .

wan 2 Roofl Floor 1 NR AFTER

NRBEFORE

Window I

Wall I

Roof I Floor I NR AFTER

NRBEFORE

Window I

WaUl

Roof I Floor I NR AFTER

I C/D. Sq.Ft. . 5 dB shielding ~.

S)-~dB

19.3

19.3

20.0

20.0

17.9 Rsrc40 8P+STC25

22.5

21.7

21.7

21.7

21.7

18.3 8P+S1'C25 WDGY+2GY

22.9

$3.00

Q

~~ti~D8 bY_l!°~~n.e; 66-70dB

19.3 SG+ WStrp

19.3 SG+ WStrp

RSTC35 RSTC35

SJL+A+RG

25.5

20.0 RSTC35 RSTC35

SJLt-A+RG

25.7

17.9 RSTC40 RSTC45

SJL+A+RG

24.9

21.7 RSTC35 RSTC35

SJL+A+RG

26.8

21.7 RSTC35

SJL+A+RG

27.0

18.3 RSTC35 WDGY+GYp

SJL+A+RG

25.1

$7.63

71-7SdB

19.3 SG+WS+SG

RSTC40 RSTC40 WDGY +GYp WDGY +GYp

SJL+A+RG

~.3

20.0 RSTC45 RSTC40 WDGY +2GY WDGY +GYp

20.0 RSTC45 RSTC40 WDGY +2GY WDGY +GYp

SJL+A+RG

29.5

17.9 RSTC40 RSTC45

SJL+A+RG

24.9

21.7 RSTC45 RSTC40 WDGY +2GY WDGY +GYp

SJL+A+RG

00.3

21.7 RSTC40 WDGY +GYp

SJL+A+RG

30.0

18.3 RSTC45 WDGY + RGA

SJL+A+RG

~.6

$16.50

76-~dB

19.3 SG+WS+SG

RSTC45 RSTC45 WDGY+MGA WDGY +MGA ! SJL+A+RG I

33.3

20.0 RSTC45 RSTC45 WDGY +MGA WDGY+MGA , I SJL+A+RG I

20.0 RSTC45 RSTC45 WDGY +MGA WDGY+MGA , I SJL+A+RG I

35.5

17.9 RSTC40 RSTC45

SJL+A+RG

24.9

21.7 RSTC45 RSTC45 WDGY +MGA WDGY +MGA I SJL+A+RG

35.9

21.7 RSTC40 WDGY +MGA

SJL+A+RG

34.7

18.3 R5l'C45 WDGY+MGA

SJL+A+RG

34.2

I I I $18.37 i

- ---

Table 1-34 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

One-Story House: 1Ype R

18.3 R5l'C45 WDGY+MGA

Room

Uving Room

Dining Room

Kitchen

Bedroom # 1

Bedroom #2

Library/Den

<.;ost Per I Dwe~ Sq. Ft. I

.

IJuildinI Element

NRBEFORE

Doorl Window 1 Window 2 .

Walll Wall 2 .

Roofl Floor 1 NR AFTER

NRBEFORE Window I .

Window 2

Wall I.

Wall2

Roof I Floor I NR AFTER

NRBEFORE

Door I Window I

Wall I

Roof I Floor I NR AFTER

NRBEFORE Window 1 ­

Window 2

Walll-

Wall 2

Roofl Floor 1 NR AFTER

NRBEFORE

Windowl

Wall 1

Roofl Floor 1 NR AFTER

NRBEFORE

Window I

Wall I

Roof I Floor I NRAFTER

C/D. Sq.Ft. 5 dB shielding asswned.

76-SOdB

19.9 RSTC40 RSTC45 RSTC40 HBLK+MGA

19.9 RSTC40 RSTC45 RSTC40 HBLK+MGA

HBLK+GYp

VP+Absrp

35.2

21.2 RSTC45 RSTC45 HBLK+GYp HBLK+RGA

VP+Absrp

36.4

18.9 RSTC40 RSTC45

VP+Absrp

33.3

23.5 RSTC35 RSTC45 HBLK+GYp HBLK+2GY

VP+Absrp

35.1

23.2 RSTC40 HBLK+2GY

VP+Absrp

35.4

19.8 RSTC45 HBLK+2GY

VP+Absrp

35.4

$15.51~

~-~dB

19.9

19.8 RSTC45 HBLK+2GY

19.9

21.2

21.2

18.9 SC+SE+ST

8P+STC25

24.5

23.5

23.5

23.2

23.2

19.8

19.8

I $0.38

ModItlcatioDS by Noise Zone

66-70dB -71-75dB

19.9 19.9 SC+SEald RSTC35 RSTC40 RSTC40 RSTC35

VP+Absrp

24.9 31.9

21.2 21.2 8P+STC25 RSTC35 8P+STC25 RSTC35

VP+Absrp

25.8 30.2

18.9 18.9 SC+SE+ST RSTC35 8P+STC25 RSrC40

18.9 18.9 SC+SE+ST RSTC35 8P+STC25 RSrC40

VP+Absrp

24.5 31.2

23.5 23.5 8P+STC25 RSTC35 8P+STC25 RSTC35

VP+Absrp

27.8 31.9

23.2 23.2 8P+STC25 RSTC35 HBLK+RGA

VP+Absrp

27.8 31.9

19.8 19.8 8P+STC25 RSI'C40

VP+Absrp

24.4 31.6

! $4.66 $8.94

I

Table 1-35 Noise Reductions. Mod1fkatlons. and Cost/Dwelling Sq.Ft..

One-StoIY House: 1)rpeS I duUdIDg I Mod1BcatiODS by Noise Zone Room Element OO-~dB 66-70dB -71-75dB

19.8 19.8 8P+STC25 RSI'C40

NRBEFORE 21.5 21.5 21.5 Door 1 SC+SE+ST SC+SE+ST Windowl 8G+SIC25 RSTC40 Window 2 . 8G+STC25 RSTC35 Uvtng Room Wall 1 BRIK+GYp Wall 2 . BRIK+GYp Roofl Floor 1 NR AFIER 21.5 26.9 29.5

NRBEFORE 24.1 24.1 24.1 Window I . RSTC35 Wtndow2 RSTC35 D 1ntng Room Wall I.

Wall 2

Roof I Floor I NR AFTER 24.1 24.1 32.7

NRBEFORE 19.9 19.9 19.9 Doorl SC+SE+ST RSTC35 Window 1 8G+STorm RSTC35 Kitchen Wall 1

Roofl Floor 1 NR AFTER 19.9 25.1 31.1

NRBEFORE 26.2 26.2 26.2 WJndow I ­ RSTC35 Wlndow2 RSTC35 Bedroom # 1 WaDI-

Wall 2

Roof I Floor I NR AFTER 26.2 26.2 33.4

NRBEFORE 26.0 26.0 26.0 Windowl RSTC35 Bedroom #2 Wall 1

Roofl Floor 1 NRAFrER 26.0 26.0 33.5

NRBEFORE 22.7 22.7 22.7 Window I 8G+src25 RSTC35 Ubraty/Den Wall I BRIK+GYp Roof I Floor I NR AFIER 22.7 27.2 31.9 Cost Per

, Dwelltng Sq. Ft. C/D. Sq. Ft. $0.00 $4.37 $7.33 . 5 dBsh JeldJng assumed. ­

76-SOdB

21.5 RSTC40 RSTC40 RSTC40 BRIK+2GY BRIK+2GY VP+Absrp

21.5 RSTC40 RSTC40 RSTC40 BRIK+2GY BRIK+2GY VP+Absrp

35.1

24.1 RSTC40 RSTC40 BRIK+2GY BRIK+GYp VP+Absrp

36.0

19.9 RSTC40 RSTC45

VP+Absrp

35.1

26.2 RSTC35 RSTC35 BRIK+GYp BRIK+GYp VP+Absrp

34.9

26.0 RSTC35 BRIK+GYp VP+Absrp

35.0

22.7 RSre40 BRIK+GYp VP+Absrp

35.3

$14.08

--

Table 1-36 Noise Reductions. Mod1fJcatlons. and Cost/Dwelling Sq. Ft..

22.7 RSre40 BRIK+GYp VP+Absrp

One-Story House: ~r , Building Modifications by_NO!!! ~ne

Room Element S)-~dB 66-70dB 71-75dB

NRBEFORE 21.1 21.1 21.1 Door I RSTC35 RSTC35 Window I 8G+src25 RSTC35 Window 2 . Uving Room 8G+src25 RSTC35 Wall I Wall 2 .

Roof I SJL+A+RG Floor 1 NR AF'IER 21.1 26.3 32.4

NRBEFORE 23.3 23.3 23.3 Window 1 ­ 8G+src25 RSTC35 Window 2 8G+src25 RSTC35 Dining Room Walll- BRIK+RGA

Wall2 BRIK+RGA Roof 1 SJL+A+RG

Floor 1 NR AFTER 23.3 26.6 33.5

NRBEFORE 19.6 19.6 19.6 Door I SC+SE+ST SC+SE+ST Window I 8G+Sl'C25 RSTC40 Kitchen WaUl

Roof I SJL+-A+RG Floor I NR AFTER 19.6 24.8 27.6

NRBEFORE 25.0 25.0 25.0 Window 1 . RSTC35 Window2 RSTC35 Bedroom # 1 Walll.

Wall 2

Roofl SJL+A+RG Floor 1 NR AFTER 25.0 25.0 34.4

NRBEFORE 24.9 24.9 24.9 Window I RSTC35 Bedroom #2 WaDI

Roof I SJL+A+RG Floor I NR AFTER 24.9 24.9 34.5

NRBEFORE 22.1 22.1 22.1 Window I 8G+SfC25 RSTC35 Ubrary/Den Wall I BRIK+MGA Roof I SJL+A+RG Floor I NR AFTER 22.1 25.8 32.5 Cost Per Dwelling Sq. Ft. C/D. Sq. Ft. $0.00 $6.33 $9.32 . 5 dB shielding assumed.

78-SOdB

21.1 RS'IC40 RS'IC45 RS'IC45 BRIK+2GY BRIK+2GY SJL+A+RG

21.1 RS'IC40 RS'IC45 RS'IC45 BRIK+2GY BRIK+2GY SJL+A+RG

35.5

23.3 .R5l'C40

R5l'C40 BRIK+2GY

BRIK+GYp SJL+A+RG

35.5

19.6 RSTC40 RSTC45

SJL+A+RG

34.7

25.0 RSTC40 RSTC40 BRIK+2GY BRIK+GYp SJL+A+RG

35.8

24.9 RSTC40 BRIK+GYp SJL+A+RG

35.9

22.1 RSTC40 BRIK+GYp SJL+A+RG

34.9

.J~

Table 1-37 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

22.1 RSTC40 BRIK+GYp SJL+A+RG

Manufactured Home: 1)rpe tJ

~ Tab le 1-37

1-.35

Table 1-38 Noise Reduction. Modtflcatlons. and Cost/Dwelling Sq.Ft..

I ~-Sti==::I~~I~~~~ 78-me-Sto Townhouse: 'v Ta ble 1-3 8

35.7

Table 1-39 Noise Reductions. Modifications. and Cost/Dwelling Sq.Ft..

~~

Living Room

Dining

Room

Kitchen

Bedroom # 1

Bedroom #2

Bedroom #3

Basement

eost Per Dwelling Sq.Ft.

Two-Story Townhouse: Type W JJulldiIt--e. Modifications Element m-mdB SJ-70dB

NRBEFORE 26.2 26.2 Doorl. Window I .

WaDI.

Roof I Floor I NR AFTER 26.2 26.2

NRBEFORE 25.7 25.7 Window I

Wall I

Roof I Floor I NR AFTER 25.7 25.7

NRBEFORE 20.0 20.0 Door 1 SG+WS+SG SG+WS+SG Wlndowl

Walll

Roofl Floor 1 NR AFTER 20.0 24.9

NRBEFORE 26.7 26.7 Windowl

Wall 1

Roofl Floor 1 NR AFTER 26.7 26.7

NRBEFORE 30.1 30.1 Window 1 .

Walll.

Roofl Floor 1 NR AFTER 30.1 30.1

NRBEFORE 29.7 29.7 Wmdow 1 .

Walll.

Roofl Floor 1 NR AFTER 29.7 29.7

NRBEFORE Window 1 - 32.7 32.7

Window 2 -

Walll-

Roofl Floor 1 NR AFTER 32.7 32.7

.

C/D. Sq.Ft. I $0.00 5 dB shklding assumed. - -~ - $0.41

by Noise Zone

-71-75dB

26.2 SC+SEaJd

26.2 SC+SEaJd

RSiC35

31.4

25.7 ~

34.9

20.0 SG+WS+SG

RS1'C35

31.1

26.7 RSIC35

34.1

30.1

00.1

29.7

29.7

32.7

32.7

$1.98 I

76-SOdB'

26.2 RSTC35 RSTC35

25.7 RSTC35

34.9

20.0 SG+WS+SG

RSTC45

32.2

26.7 RSTC40

35.1

30.1 RSI'C35

35.3

29.7 RSTC35

35.2

32.7 RSTC35 RSTC35

43.4

$3.85 L

Table 1-40

32.7 RSTC35 RSTC35

Noise Reductions, Modifications, and Cost/Dwelling Sq.Ft.. Two-Story Townhouse: Type X Modifications by Noise Zone

Building Room Element NR BEFORE Door 1 * Window 1 * Living Room Window 2* Wall1 Wall 2* Roof 1 Floor 1 NR AFTER NR BEFORE Window 1 Dining Room Wall 1 Roof 1 Floor 1 NR AFTER NR BEFORE Door 1 Window 1 Kitchen Wall 1 Wall 2 Roof 1 Floor 1 NR AFTER NR BEFORE Window 1* Window 2 * Bedroom #1 Wall 1 * Wall 2 * Roof 1 Floor 1 NR AFTER NR BEFORE Window 1 * Window 2 * Bedroom #2 Wall 1 * Wall 2* Roof 1 Floor 1 NR AFTER NR BEFORE Window 1 * Bedroom #3 Wall 1 * Roof 1 Floor 1 NR AFTER NR BEFORE Window 1* Window 2* Basement Wall 1* Roof 1 Floor 1 NR AFTER Cost/Dwell.Sq.FL C/D. Sq.Ft.

60-65dB 24.5

24.5 24.4

24.4 19.2

19.2 22.0

22.0 25.9

25.9 28.3

28.3 32.7

32.7 $0.00

66-70dB 24.5

24.5 24.4

24.4 19.2 SG+WS+SG 8G+STC25

24.4 19.2 SG+WS+SG 8G+STC25

24.4 22.0 8G+STC25 8G+STC25 WDGY+2GY WDGY+2GY

26.9 25.9

25.9 28.3

28.3 32.7

32.7 $1.96

71-75dB 24.5 RSTC35 RSTC35 RSTC35

30.1 24.4 RSTC40 WDGY+GYp

31.6 19.2 SG+WS+SG RSTC45

25.5 22.0 RSTC40 RSTC40 WDGY+2GY WDGY+2GY

30.3 25.9 RSTC35 RSTC35 WDGY+GYp WDGY+GYp

30.3 25.9 RSTC35 RSTC35 WDGY+GYp WDGY+GYp

31.0 28.3 RSTC35

31.5 32.7

32.7 $6.06

76-80dB 24.5 RSTC40 RSTC40 RSTC40 WDGY+RGA WDGY+RGA

35.0 24.4 RSTC45 WDGY+RGA

35.1 19.2 SG+WS+SG RSTC45

25.5 22.0 RSTC45 RSTC45 WDGY+MGA WDGY+MGA

34.7 25.9 RSTC45 RSTC45 WDGY+MGA WDGY+MG

35.0 28.3 RSTC45 WDGY+RGA

35.1 32.7 RSTC35 RSTC35

43.4 $9.14

35.1 32.7 RSTC35 RSTC35

5 dB shielding assumed. 1-38

Table 1-41 Noise Reductions, ModJflcatlons, and Cost/Dwelling Sq.Ft.,

Two-Story Dwelling: Type Y - 'Building

Room i Element i m-~dB

ModUlcatiODS by Noise Zone

~-70dB 71-7SdB 78-SOdB

Uving Room

NRBEFORE

Door I Window I Window2

Wall I Wall 2

Roof I Floor I NRAFTER

20.1

20.1

20.1 RSTC35 RSTC35 RSTC35

20.1 RSTC35 RSTC35 RSTC35

26.0

~.l RSTC40 RSTC40 RSTC40 WDGY+2GY WDGY +GYp

~.2

20.1 RSTC40 RSTC45 RSTC45 WDGY+MGA WDGY+MGA

35.4

Dining Room

NRBEFORE

Window 1 - Window 2 - Walll­ Wall2­

Roofl Floor 1 NRAFTER

26.6

26.6

26.6

26.6

26.6 RSTC35 RSTC40 WDGY +GYp WDGY +GYp

32.0

26.6 RSTC40 RSTC40 WDGY+RGA WDGY +RGA

26.6 RSTC40 RSTC40 WDGY+RGA WDGY +RGA

35.0

Kitchen

NRBEFORE

Doorl- Window 1 -

Walll- Wall 2 ­

24.6 24.6 24.6 RSTC40 RSTC40

24.6 RSTC40 RSTC45

Roofl Floor 1 NRAFIER 24.6 24.6 29.7 30.4

Famtly Room

NRBEFORE

Window I

Wall I

Roof I

24.8 24.8 24.8 RSTC35 WDGY +GYp

24.8 RSTC45 WDGY + RGA

Floor I NR AFI'ER 24.8 24.8 00.9 34.9

24.8 RSTC45 WDGY + RGA

Bedroom # 1

NRBEFORE

Window I Wtndow2

Wall I Wall2

Roof I Floor I NR AFTER

21.8

21.8

21.8 RSTC40 RSTC40

25.4

21.8 RSTC45 RSTC40 WDGY+2GY WDGY +2GY

00.6

21.8 RSI'C40 RSI'C40 WDGY +MGA WDGY+MGA

34.9

Bedroom #2

NRBEFORE

Window I

Wall I

Roof I Floor I NR AFTER

24.6

24.6

24.6

24.6

24.6 RSTC35 WDGY +2GY

24.6 RSTC35 WDGY +2GY

VP+Absrp

32.1

24.6 RS1'C45 WDGY +MG VP+Ab+GY

36.7

Table 1-41 (Continued)

Table 1 -41 (con t. )

NRBEFORE 21.1 21.1 21.1 21.1 Door I SC+SE+ST SC+SE+ST RSTC40 Window I 8G+Sl'C25 RSTC35 RSTC40 Uving Room Window 2 8G+STorm RSTC40 RSTC40 Wall I BRIK+GYp BRIK+GYp Wall2 BRIK+GYp Roof I Floor I NR AFI'ER 21.1 26.1 29.5 35.0

24.6 RS1'C45 WDGY +MG VP+Ab+GY

NRBEFORE 28.7 28.7 28.7 28.7 Window I - RSTC35 RSTC35 Window 2 - RSTC35 RSTC35 Dining Room Wall I- Wall 2 ­

Roof I Floor I NR AF1ER 28.7 28.7 36.1 36.1

NRBEFORE 25.9 25.9 25.9 25.9 Doorl- SC+SE+ST RSTC35 Window 1 - RSTC35 RSTC35 Kitchen Walll­ Wall2­

Roofl Floor 1 NR AFTER 25.9 25.9 32.5 35.6

NRBEFORE 26.4 26.4 26.4 26.4 Window I RSTC35 RSTC35 FamJ1y Room WaDI

Roof I Floor I NR AFTER 26.4 26.4 35.2 35.2

NRBEFORE 24.0 24.0 24.0 24.0 Window I RSTC35 RSTC40 Window 2 RSTC35 RS1'C35 Bedroom # 1 Wall I BRIK+2GY Wall 2

Roof I

BRIK+GYp

Floor I NR AFI'ER 24.0 24.0 33.7 34.8

NRBEFORE 27.0 27.0 27.0 27.0 Window I RSTC35 RSTC40 Bedroom #2 WaDI

Roof I Floor I

VP+Absrp

NR AFTER 27.0 27.0 34.2 37.6

NR AFTER 27.0 27.0 34.2 37.6

-4

NRBEFORE 24.7 24.7 24.7 24.7 Window I RS1'C35 RSTC40 Wlndow2 RS1'C35 RSTC35 Bedroom #3 Wall I Wall 2

Roof I Floor I

VP+Absrp

NR AFTER 24.7 24.7 33.2 35.6

NRBEFORE Window I 28.4 28.4 28.4 RSTC35

28.4 RSTC35 Window2- RSTC35 RSTC35 Bedroom #4 Wall I- Wall 2

28.4 RSTC35 Window2- RSTC35 RSTC35 Bedroom #4 Wall I- Wall 2

Roof I VP+Absrp Floor I NR AFTER 28.4 28.4 34.7 36.8

NRBEFORE 28.8 28.8 28.8 28.8 Window 1 . Window 2 .

RSTC35 RSTC35

RSTC35 RSTC35 Den Walll. Wall2.

Roofl Floor 1

VP+Absrp

NR AFTER 28.8 28.8 34.8 36.9

NRBEFORE Window 1 *

34.6 34.6 34.6 34.6

Window 2 * Basement Walll WaD 2 *

Roofl Floor 1 NRAFrER 34.6 34.6 34.6 34.6 (;ost Per Dwe1l1ng Sq. Ft. C/D. sq.Ft. $0.00 $0.30 I $3.30 I $4.52 j . 5 dB shJelding assumed.

NR AFTER 28.8 28.8 34.8 36.9

Table 1-42 (Continued)

­

­

Table 1-43

Cost Multiplier for Each Region

Region I D ill IV v VI vn vm IX x XI

Cost 1.03 0.86 0.77 0.88 1.07 0.78 0.87 0.84 0.94 0.79 1.04 MultipUer

SINGLE NOISE ZONE MODIFICATION COSTS WORKSHEET

Region DNL ZOne

House

Type

No. of

Units

Cost/ Dwelling Sq. Ft.

SINGLE NOISE ZONE MODIFICATION COSTS WORKSHEET

Size (Sq.Ft.)

Unit Cost

TOTAL

COST

A B C D

E F G H

I J K

L M

N 0 P g R S T U V W

X

Y Z

ZOne Cost:

Geographic Cost Factor:

~usted Zone Cost:

Figure 1-2. Single Noise Zone Modification Costs Worksheet.

(Repeated as Figure 3-23.)

2.0 BASIC CONCEPTS

2.1 Sound Ezposure Metrics

A - Weighted Sown Level

2.1 Sound Ezposure Metrics

The normal human ear can detect sound frequencies ranging from about 20 Hz to about

15,000 Hz. Hertz is the unit used to indicate frequency and is equal to the number of cycles per second. Low-pitched sounds have low frequencies and high-pitched sounds have high frequencies. People do not hear all sounds over this wide range of frequencies equally well, however. The human ear is most sensitive to sounds in the 1000 to 4000 Hz range.

In order to reflect the differences in hearing sensitMty to different frequencies. sound leveJs are usually stated in terms of the A-weighted audibility scale. When a sound spectrum is Aweighted. sound levels in the 1000 to 4000 Hz frequency range are Increased by a specified amount to account for the fact that the earpereeives them as louder compared to other frequencies. Similarly. the loudness at lower frequencies and at much higher frequencies is reduced because the ear is less sensitive in those regions. The A-weighung cmve in Figure 2-1 shows how much

is added to. or subtracted from. a sound level depending on the frequency. For example. at 250 Hz a value of 8.6 dB would be subtracted from a sound level to get theA-weighted one-third octave level. The unit of measure for all noise levels is the decibel (dB) andA-weighted levels are indicated by the unit "dBA".

F1gure 2.1. A-Weighting Versus Frequency.

2~:

Day-N(qht A~e Sound Level (DNLJ and Noise Contours

Aircraft noise exposure in a connnunity is usually described in terms of noise contour maps. These indicate bands or zones around airfields where the average noise level can be expected to fall within the ranges specified by the contour lines. Contour maps typically show continuous lines of equal exposure drawn in 5 dB increments. FJgure 2-2 shows a sample contour map.

Continue reading ↓ 120 of 521 passages shown