Radar Vectors
Advisory Circular Cancelled Issued Oct 24, 1978 AFS-350 14 pages Copy saved Nov 18, 2026

AC 135-7 FAR 135: Additional Maintenance Requirements for Aircraft Type Certificated for Nine or Less Passenger Seats

This advisory cireular (AC) provides information relative to establishing methods acceptable to the Administrator for compliance with the additional maintenance requirements of the Federal Aviation Regulations (FAR) Part 135 as amended for certain air taxi operators and commercial operators (ATCO).

This document is cancelled. Cancelled by 135-7A. Check the official source before relying on it.

Official source ↗ Open PDF

AC 135-7

DATE 10/24/78 ADVISORY CIRC.ULAR

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

\Vashington, D.C.

FAR GUIDANCE MATERIAL

FAR 135: ADDITIONAL MAINTENANCE ~UIREMENTS FOR AIRCRAFT Subject: TYPE CERTITICATED FOR NINE OR LESS PASSENGER SEATS

1. PURPOSE. 'Ibis advisory cireular (AC) provides information relative to establishing methods acceptable to the Administrator for compliance with the additional maintenance requirements of the Federal Aviation Regulations (FAR) Part 135 as amended for certain air taxi operators and commercial operators (ATCO).

FAR GUIDANCE MATERIAL

2. FOCUS. '!he information contained in this AC applies only to ATCO that use aircraft that are type certificated, excluding any pilot seat, for nine or less passenger seats.

3. RELATED FAR PARTS 1, 23, 25, 27, 29, 33, 35, 43, 91, and 135.

4. DEFINITION. lhe term "maintenance," as used in this AC and in FAR Section 135.421, means inspection, overhaul, repair, preservation and the replacement of parts tut excludes preventive maintenance, as defined in FAR Part 1.

5. RELATED READING MATERIAL. AC 135-3B, Air Taxi Operators and Commercial Operators Of Small Aircraft, contains additional information regarding certain aircraft inspections and air taxi operators' manuals referenced in this AC.

6. BACKGROUND. By amendnent issued September 26, 1978, the Federal Aviation Administration (FAA) amended FAR Part 135 effective December 1, 1978. '!he amended FAR requires ATCO using aircraft that are type certificated, excluding any pilot seat, with nine or less seats, to comply with additional maintenance requirements for each aircraft engine,

propeller, rotor, and each item of required emergency equiµnent. FAR Section 135.11(b)(2)(v), as amended, requires operators of those aircraft to list the additional maintenance requirements on their operations specifications. Prior to the amendment, FAR Part 135 only required an aircraft be inspected in accordance with the provisions of FAR Part 91 or an approved inspection program under Part 135. The amended rule, in addition to the inspection requirements, sets forth maintenance

Initiated by: AFS-83()

AC 135-7 10/24/78

requirements that may include the overhaul and replacerrent of parts at specified ti.me intervals.

7. DISCUSSICN. FAR Section 135.421 sets forth additional maintenance requirer.'M:lnts for each aircraft engine, propeller, rotor, and each item of required emergency equipnent. 'Ihe rranufacturer of an aircraft, aircraft engine, rotor or propeller is :required by the FAR to nake available a maintenance marual or rraintenance instnictions that it cx:.>nsiders essential

for the proper maintenance of its product. FAR Section 135.421 req.Jires an A'l:O) to maintain this equipnent in accordance with a maintenance prcqram rea:mrended by the manufacturer. FAR Section 135 .421 also allows an A'IU) to use a program other than the manufacturer's if it is a_wroved by the Administrator. 'Ihis provision allows an operator to utilize the experience it gains in rraintaining this equipnent to adjust inspection and overhaul times different than those rea:mnended by the manufacturer of the

referenced prod.lets.

a. 'Ihe additional maintenance requirements in FAR Part 135 are in addition to the requirements set forth in FAR Parts 91 and 43. 'Ihe additional maintenance :requirements may be accooplished in accordance with other maintenance required by the FAR and are not intended to d.Iplicate any present inspection requirements. In the majority of cases, the marufacturer's recx:mrended maintenance program frequencies may be the same as those required by a specific FAR; e.g., FAR Section 91.169 requires an aircraft to have a lOQ-hrur inspection when it is used to carry :i;::ersons

for hire. If a na.nufacturer's program reoorrmends a 100-hrur inspection, the inspection of the additional maintenance items and work may be perfonred along with the aircraft 100-hoor inspection.

b. If a progressive inspection program has been established under FAR Section 91.171 or an inspection program required by FAR Section 91.217 or an approved aircraft inspection program under FAR Section 135.419, the A'IU) may, after cx:.>ordination with the FAA certificate holding district office, utilize those inspection :i;::eriods in lieu of those rea:mnended by

the na.rufacturer. 'Ihe FAA certificate holding office na.y, if time deviations are involved, ai;prove the programs in lieu of the manufacturer's rec:arunaooed program providing an operator supplies the proper justification with its request. 'Ihe acceptance is usually based upon satisfactory service experience or industry experiences and a determination that the deviation will not adversely affect the aitw0rthiness of the aircraft.

a. A maintenance program for each aircraft engine, propeller, rotor, and each item of required emergency equipnent may be a program that is rec:arunanded by the rrarufacturer of the aircraft or the rrarufacturer of the aircraft engine, rotor, propeller, or an item of anergency equipnent.

b. '!he aircraft manufacturer's maintenance manual, in most cases, contains the frequency and the extent of maintenance necessary for the aircraft engine, propeller, and rotors. It may also include the frequency of 01Terhauls and the life limit of components requiring replacenent.

2

10/24/78 AC 135-7

c. If the aircraft manufacturer's maintenance manual does rot oontain all the maintenance and inspection requiranents, then the respective

instructions issued by the manufacturer of the aircraft engine or propeller should be utilized. 'lhe manufacturer of the aircraft engine is required by FAR 33 .s and the manufacturer of the propellers is req..iired by FAR Section 35 .3 to provide instructions for the installation, servicing, and maintenance of its product.

d. 'lhe manufacturer of emergency equipnent does rot always provide maintenance prograns with its eq.iipnent. However, in m:>st cases, the manufacturer does reoanmend a maintenance program for its product. 'Ibis

progran may, after review by the FAA certificate holding district office, be acceptable for use by an A'It.'O. Certain e:nergency equipnent items SJch as an ELT and high pressure cylinders are required by FAR or other federal regulations to be maintained, inspected, and tested at specific periods. Those specified times shoold be included in an A'JX:O program for its emergency equipnent.

9. ~ APPROVED BY 'L'HE Ar:MINISTRA'l'OR. FAR Section 135.421 provides for use of a progran other than one reccr.rnended by manufacturer, if it is awroved by the Administrator. 'Ibis provision of the regulation allows a certificate holder to develop a progran for each aircraft engine, propeller, rotor, and each item of e:nergency egJipnent.

a. An ATCO may request approval to use only parts of a manufacturer's recx::,rw.ended progran. An A'ICO may re<;pest an increase in the time between overhauls (TOO) or may request extension of specific inspection items to make those items canpatible with an inspection program established for its

aircraft.

b. Changes to time limitations are rorrnally considered on the basis of satisfactory service experience or industry experience when SJfficient

justification can be furnished and that the changes will rot adversely affect the ain.orthiness of the aircraft.

c. 'lhe inspection period established for emergency equipnent should ensure that it is serviceable, that all ca:nponents of the anergency eq.iipnent are canplete, and it may be expected to remain in that oondition until the next inspection or in actual use under an e:nergency oondition.

d. Parts listed as life limited on the FAA type certificate data sheets, in the airplane flight manual, or other documents are rot eligible for a time increase unless those times are revised by the FAA on the FAA-ai;:proved documents that sets forth the times for the replacement of those life limited parts.

10. OPERATIOOS SPECIFICATICNS - AIRCRAFT MAINI'ENANCE. 'lhe req..iirement to show time limitations on operations specifications for the a::klitional maintenance requiranents is ootlined in FAR Section 135.ll(b) (2) (v).

3

AC 135-7 10/24/78

FAR Section 135.421 requires that the ATCO use a program that is recorrmended by the marufacturer or use a program that is approved by the Administrator. The program that is used by an ATCO, in order to corrply with FAR Section 135.ll(b}(2}(v), shoold either be referenced or described on the A'IO'.)'S operations specifications. 'Ihe ATCD is responsible for developing the contents of its operations specifications and to submit them to the FAA for ai;:,proval. An ATCD is encxiuraged to have preliminary discussions with FAA inspectors during the developnent or amendmen-.:. of its cperations specifications. In many instances, time and effort may be saved by informally resolving aey items that ro..ild cause delay in the formal awroval of cperations specifications - aircraft maintenance. It is also acceptable

to have the additional naintenance itans that are included in accepted or approved inspection programs referenced oo its cperations specifications. When a referenced inspection program does oot include all of the marufacturer's recx:mnended checks, inspections, and overhaul time periods,

those items may be included on its cperations specifications. It is important that the docunents and manuals that are referenced identify all of the required co:nponents. 'Ihe figures shown in this AC are oot intended to be all inclusive. 'Ibey shCM examples of a significant rumber of variations

that are available for an cperator to use to develop its cperations specifications - aircraft naintenance. EXarnples of those cperations specifications can be fu.md in Appendix 1 as follows:

a. Figure 5. Operations specifications indicating the inspection, checks, and overhaul are oontained in the cperator's awroved aircraft

inspection program for the aircraft it operates.

b. Figure 6. Operations specifications indicating the inspection and check are accanplished in accordance with a manufacturer's manual with a deviation fran the prescribed overhaul time for the engine and its carp:>nents.

c. Figure 7. Operations specifications indicating the inspection, check, and overhaul tines are contained in the inspection program awroved by the FAA in accordance with FAR section 91.217(b){S).

11. PREPARATICN OF OPERATIOOS SPECIFICATICNS. Operations specifications are prepared by the cperator using FAA Form 1014, Operations Specifications. These forms are available fran any FAA Flight Standards Field Office. A s~le of the rec:x:r.m:nded format is shown in Figure 1. %.e follCMing outline may be used as a guide:

a. '!be name of the operator shoold appear at the top of the page.

b. 'lhe specification page shoold identify the page as "Aircraft Maintenance - Nine Or Less Passengers, Additional Maintenance Requirements" as shown in Figure 1.

4

10/24/78 AC .135.-7

c. All pages are to be properly runbered and dated. Each cperations specifications pag-e shoold be rurnbered oonsea.itively showing the total number of pag-es in each series of the specifications; i.e., page 1 of 4, pag-e 2 of 4, etc.

a. The operator is reSJ;X>nsible for submitting the information on the reverse side of FAA Form 1014 as indicated in Figures 2 and 3. D.lring the

initial application, the q,erator shoold indicate "original issuance." When an application is made for an amendrrent to an cperations

specifications, a time increase or the addition of an item, the cperator sha.tld submit the reasons and supporting data for its req..iest. An exarrple of a justification statement is shown in Figure 3.

e. 92erations specifications can either reference a manual (air taxi marual, marufacturer's manual, progressive inspection :ma.nual, etc.), or it may list its time limitations for overhauls, inspections, and checks of

its aircraft engines, propellers, etc.

(1) When referencing a manufacturer's data, the manual or doa.nrent sha:ild be identified by the J!B.nu facturer' s axle, sy.mool, chapter, and/or pag-es, or by any other traceable identifier. An example of an acceptable method is shown in Figure 1.

(2) An cperator developing its cwn maintenance program is required to show the check, inspection, and overhaul time limits en the operations specifications as indicated in Figure 4. The iterns can be listed by referencing the major cor:ponents of the ATA-100 code for the purpose of standardization as shewn in Figure 4. As was mentioned earlier

in this AC, an cperator may request ai:proval to deviate from specific parts of a marufacturer's program. In cases where a change has been

justified, operations specifications may be approved.

/i 2 ~1~~~· ' /Acting Director J Flight Standards Service

5

AC 13.5-7 Appendix 1

APPENDIX 1. SAMPLE OPERATIONS SPECIFICATIONS AIRCRAFT MAINTENANCE: FOR USE BY A'rCO

APPENDIX 1. SAMPLE OPERATIONS SPECIFICATIONS AIRCRAFT MAINTENANCE: FOR USE BY A'rCO

FIGURE 1. EXAMPLE OPERATIONS SPECIFICATIONSi AIRCRAFT MAINTENANCE - NINE OR

LESS PASSENGERS: ADDITIONAL MAINTENANCE REQUIREMENTS PROGRAM BY REFERENCE TO MANUFACTURERS' DOCUMENTS

UNITED STATE$ OF A.M£RlCA. DEPARTMENT OF TRANSPORTATION

UNITED STATE$ OF A.M£RlCA. DEPARTMENT OF TRANSPORTATION

Form ApJ)T()V~d, OMB No. 04-ROO?S

FEO&AAI.. AVl"TION ADMINISTR ....TION

WAISHtJltGTON Page 1 of l OPERATIONS SPECIFICATIONS

DORO AVIATION SERVICE AIRCRAFT MAINTENANCE - NINE OR LESS PASSENGERS

ADDITIONAL MAINTENANCE REQUIREMENTS

CESSNA - 421

Aircraft operated by Doro Aviation Service shall not be utilized in air taxi/ conmercial operator operations unless:

CESSNA - 421

1. The Teledyne Continental Motors engine model GTSI0-520C and its component parts, accessories, and appliance are maintained in an airworthy conditio1 in accordance with the schedule of maintenance, inspection, and overhaul times set forth in Cessna Model 421 Service Manual 0817-13, as amended, and the other manufacturers' service manual referenced therein as amended

2. The McCauley propeller model 3AF 34C-74 and its component parts are maintained in an airworthy condition in accordance with the schedule of maintenance, inspection and overhaul times set forth in the Cessna Model 421 Service Manual 0817-13 1 as amended, and the other manufacturers' service manuals referenced therein as amended.

3, 'The items of installed required emergency equipment are maintained in an airworthy condition in accordance with the schedule of maintenance inspection and overhaul functions set forth in the product manufacturer's service and overhaul instructions as follows:

Lifevest -Pan Avion Overhaul Manual 310·9 Liferaft - Pan Avion Overhaul Manual 310-9 'l'.)xygen Kegulator - Scott overhaul Manual H-137 *Oxygen Bottle• Scott Overhaul Manual H-120 Oxygen Mask - Scott Service Instructions *C02 Extinguisher - Walter Kiddie Overhaul Manual, with Illustrated Parts List, Part No. 870904.

4, Parts having retirement times are replaced as outlined in the Cessna Model 421 Service Manual 0817-13, as amended, and on the FAA, Aircraft Type Data Sheet A7CE as revised, Engine Type Data Sheet E7CE as revised and Propeller Type Data Sheet P22E as revised.

*Inspections Test and Life Limits will be accomplished as set forth in Part 173, Chapter 1, Subtitle B of CFR 49, currently in effect.

Effective date------------­

FAA F'orm 1014 (2-1:l)

1

AC 135- 7 10/24/78 Appendix 1

FIGURE 2. EXAMPLE OF REVERSE SIDE OF OPERATIONS SPECIFICATIONS,

FAA FORM 10141 ORIGINAL CERTIFICATION WITH FAA APPROVAL

FAA FORM 10141 ORIGINAL CERTIFICATION WITH FAA APPROVAL

FEDERAL AVIATION ADMINISTRATION Operating Certificate No....AEA!:9fll.... Washington, D. O.

~!;•.Aix.J:w … t.D.c.,... --··············-··-······-····-················· hereby makes application for amendment of the Operations Specifications nppenring on the reverse side hereof, ns follows:

Original Issuance

Reasons and supporting data (if insufficient space attach additional page):

Meets the requirements of FAR 135

I CERTIFY that the statements submitted in connection herewith are true tLDd that I am duly authorized to make this applicatfou on behalf of the applicant.

Able B. Charlie

(81""'""") Director of Maintenance Date ____January__ 1,__ 1979 … …

Ii-sPECToR's RECOMMENl>ATlo;,;s:

(81pata,.i ••••••••• • •••••••••••••••••

(Title) •• ·····················--·-····

'l'he Operations Specifications set forth on tbe reverse side hereof are . .ap.p.:coYed-•••....• … ••.•••..•• …

Amendment No … 9.i::t.&~n!l: … By ~tion of t~Administrator:

Effective date ....J.~.U.\l?i.l=.Y.•• L,. J,2Z9.. r.:~-~~:~v····································· (Sl,m1tnn)

Supersedes specifications <late.<i … ••• … •••

Received for th~DJ>IJ.ca.nt 91: l!J • ~ c. 444,,ltc … , .AJ;>ie. B,.. Charlie …

(Blsnat.ure)

Date ...January. 3 , .. .1979 ············-- _Director __of. Maintenance·······-···-­

CTB1o>

2

10/24/78 AC 135-7

Appendix 1

Appendix 1

FIGURE 3. EXAMPLE OF REVERSE SIDE OF OPERATIONS SPECIFICATIONS. FAA FORM 1014 2 REQUEST FOR INCREASE IN TIME LIMITATIONS, WITH FAA APPROVAL

FEDERAL AVIATION ADMINISTRATION Opernting Ccrtifica~ No. AEA~.6.01 … Washington, D. 0.

-~-~-C::--~-!E..'!'.~.i:t.!.1.-~.P-£: … hereby makes application for amendment of the Opcrntions Specifications nppenring on the reverse side hereof, ns follows:

Increase the overhaul period of the Lycoming I0360 engine from 1200 hours to 1500 hours.

Reasons and supporting data (if insufficient space attach additional page):

The above increase is based on the satisfactory experience of 20 months of operation and a tear down inspection of three engines (each 1200 hours) that

resulted in satisfactory findings and installation of improved bearing in accordance with manufacturer's recommendations. This increase in TBO will not adversely effect the airworthiness of those engines.

I CERTIFY that the statements submitted in connection herewith are true and that I am duly authorized to make this application on beha!C of the applicant.

Able B. Charlie

(Slalotan) Date … January .1, __ 1979 --···-··-·--·-· Director of Maintenance

(Tit..)

}!,SPECTOR'~ RECOMM£SDATIONS:

--···· ~'-">··--···········--··-········

(Title)········ ---------··············

The Operations Specifications set forth on the reverse side hereof are ..!P..P.~~Y-~~:--------··-----······--·····-­

Amendment No....J·-·······-·--------··-- By direction of t:t.Administrator:

...!)•)1f. -, ~c;,,-..1 Effective date … J.<lU\l.U::Y.••l~.J,2Z2. _I,.. M.___Spec tor____·--------····--·····--···---------··· (Bl-)

Supersedes specifications dated .. J.IIDUAI}'..•l.,...l.2Z.1L Principal._J.Y.i11U1:m .. $.~f~.ty___l)l$.P.i:.<;J.Q.r.•.{AW.)••

AEA-GAOO·IQ <Tt11t>

Received for the apylicant b_r: !!,( • .af,16., 4, "'t--Uic(.. .A.b.le...a.__C.ll11:i::l~ … •.········-·····--··-----·-­ (8~) Date ...J.an.ua:cy___4..._l.9.l9 … ..D.i.1:.e.c.t&L_Qf..Main.t~n.anJ;~-------­ rrn1t>

3

AC 135-7 10/24/78 Appendix 1

FIGURE 4. EXAMPLE OPERATIONS SPECIFICATIONS, AIRCRAFT MAINTENANCE ­

FIGURE 4. EXAMPLE OPERATIONS SPECIFICATIONS, AIRCRAFT MAINTENANCE ­

NINE OR LESS PASSENGERS, ADDITIONAL MAINTENANCE REQUIREMENTS/PROGRAM DEVELOPED BY OPERATOR

Form Approved. UNITED S'tAl'ES OF AMERICA OM'B No. 04-R00'75 DEPARTMENT OF TRANSPORTATION

F"EOERAI.. AVIATION ACIMINISTR ...TION

F"EOERAI.. AVIATION ACIMINISTR ...TION

WASMIHQ:TON Page 1 of 3 OPERATIONS SPECIFICATIONS

DORO AVIATION SERVICE, INC. AIRCRAFT MAINTENANCE· NINE OR LESS PASSENGERS

ADDITIONAL MAINTENANCE REQUIREMENTS

CESSNA 182

~- Aircraft operated by Doro Aviation Service shall not be utilized in air taxi/ commercial operator operations unless the aircraft engine, propeller and required emergency equipment are maintained in an airworthy condition in accordance with

CESSNA 182

the schedule of maintenance and inspection functions and procedures as outlined in these operations specifications.

B. Parts or subcomponents not listed on these operations specifications will be checked and inspected and/or overhauled at the same time limitation specified for

the aircraft engine and propeller.

C. Inspection/check requirements. All work shall be accomplished in accordance with the applicable procedures as listed in these operations specifications, the Cessna !Model 182 Service Manual D2006-C3-13 and other manufacturers' manuals referenced

therein as amended.

"PF'' Preflight to be accomplished each service calendar day.

"A" Inspection/check to be accomplished before exceeding sixty (60) hours time in service.

"B" Inspection/check to be accomplished before exceeding one hundred and

twenty (120) hours time in service.

"C" Inspection/check to be accomplished before exceeding two hundred and fort}f (240) hours time in service.

D. Mote reference

1. Replace every 120 hours time in service or every six months. 2. Replace as required, 3. Replace at engine overhaul or after five years. 4. Replace as required each engine overhaul. 5. Inspect and overhaul in accordance with Walter Kiddie Overhaul Manual with IPL, Part 4t870904. 6. Inspect and overhaul in accordance with Scott Overaaul Manual H-137. 7. Inspect and overhaul in accordance with Pan Avian Overhaul Manual 310·9.

E. Unless otherwise specified,all times are listed as hours of time in service.

Effrctive date

FAA Form 1014 (2-72)

4

10/24/78 AC 135-7

Appendix 1

Appendix 1

FIGURE 4. (CONT'D) EXAMPLE OPERATIONS SPECIFICATIONS, AIRCRAFT MAINTENANCE - NINE OR LESS PASSENGERS, ADDITIONAL MAINTENANCE REQUIREMENTS/PROGRAM DEVELOPED BY OPERATOR

Form Approved. UNITED STATES OF AMERICA 0Ml3 No. 04 ..RQ07$ DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION A.DMINl$1'11U,f'10N

FEDERAL AVIATION A.DMINl$1'11U,f'10N

WAtHr ...GToH Pa2e 2 of 3 OPERATIONS SPECIFICATIONS

DORO AVIATION SERVICE, INC. AIRCRAFT MAINTENANCE - NINE OR LESS PASSENGERS

ADDITIONAL MAINTENANCE REQUIREMENTS

CESSNA 182

OVERHAUL PREFLIGHT INSPECTION PERIOD INSPECTION PERIODS !:!QI!

Vacuum/Pressure. Chanter 37 1,700 Vacuum oil separator B

OVERHAUL PREFLIGHT INSPECTION PERIOD INSPECTION PERIODS !:!QI!

PowerDlant ChaDter 71 1,700 Engine mount x c 4 Electrical harness x c Hoses B 3 ~etal lines & fitting x A

Engine Reciorocatin2. Chanter 72 1,700 x A Engines baffles x A Cylinders x B Crankcase x B

I2nition Chanter 74 1,700 Ignition harness x B Sparkplugs x B

En2ine Controls. Chanter 76 1,700 Engine controls and linkage x A 4

Erui:ine Exhaust, Chanter 78 1,700 [Exhaust system x A 4

En2ine Oil ChaDter 79 1,700 Engine oil screen A External, oil filter A 1 K>il cooler x B

EQuioment/ Furnishin2 Chanter 25 First aid kit 6 months x B Lifevest and rafts 1 year x B 7 Pan Avion C-10·1 Transmitter, emergency 6 months x B

Fire Protection, Chapter 26 Cylinders C02* x 5 Bottle weight check 6 months

Effective do.te

FAA Form 1014 (2-72)

5

AC 135- 7 10/24/78 Appendix 1

FIGURE 4. (CONT'D) EXAMPLE OPERATIONS SPECIFICATIONS, AIRCRAFT MAINTENANCE· NINE OR LESS PASSENGERS, ADDITIONAL MAINTENANCE REQUIREMENTS/PROGRAM DEVELOPED BY OPERATOR

UN,T£D STATES OP: AM£RlCA DEPARTMENT OF TRANSPORTATION

UN,T£D STATES OP: AM£RlCA DEPARTMENT OF TRANSPORTATION

f"EDERAL AVIATION ADMJNISTRATION

WASNINGTO"

Form ApprO"Ved. OMB No. 04·R0075

Page 3 of 3 OPERATIONS SPECIFICATIONS

DORO AVIATION SERVICE, INC. AIRCRAFT MAINTENANCE - NINE OR LESS PASSENGERS

ADDITIONAL MAINTENANCE REQUIREMENTS

CESSNA 182

CESSNA 182

PREFLIGHT INSPECTION OVERHAUL PERIOD INSPECTION PERIODS ~

Qasygen 1 Chapter 35 Bottle, oxygen* Regula tor, oxygen flow.

Propeller, Chapter 61 Spinner Spinner bulkhead Blades Bolts & nuts Hub Governor & control

Powerplant 1 Chapter 71 Induction air filter lnduc~ion air box, air valves doors and controls Cold and hot air hose Intake system Engine shock mounts, mount structure and ground straps

PREFLIGHT INSPECTION OVERHAUL PERIOD INSPECTION PERIODS ~

6,000

1,200

1,700

x

x x x x x x

x x

x x x

B

A c A c c c

A B

c A c

6

2

*Hydrostatic and life limits will be accomplished as set forth in Part 173, Chapter 1, Subtitle B of CFR 49 currently in effect.

Effective dnte

FAA Fo,rm 10H (2·72)

6

10/24/78 AC 135-7 Appendix 1

FIGURE 5. EXAMPLE OPERATIONS SPECIFICATIONS - AIRCRAFT MAINTENANCE ­

FIGURE 5. EXAMPLE OPERATIONS SPECIFICATIONS - AIRCRAFT MAINTENANCE ­

NINE OR LESS PASSENGERS, REFERENCING THAT ADDITIONAL MAINTENANCE REQUIREMENTS ARE CONTAINED IN THE APPROVED AIRCRAFT INSPECTION PROGRAM

Form Approvt'd. UNITED STAT£S OF AMERICA OM13- No. 04-ROO"ffl. DEPARTMENT OF TRANSPORTATION

FEDERAL A.VtATfON AOMIN1$TRATION

OPERATIONS SPECIFICATIONS

ABC AIR TAXI, INC, AIRCRAFT MAINTENANCE· NINE OR LESS PAS~ENGERS

ABC AIR TAXI, INC, AIRCRAFT MAINTENANCE· NINE OR LESS PAS~ENGERS

ADDITIONAL MAINTENANCE REQUIREMENTS

ABC air taxi is authorized to utilize the check, inspection and overhaul period outlined in its approved aircraft inspection program dated 12/5/78 that is contained in Chapter 6 of the ABC air taxi operations manual for its aircraft engine, propeller and emergency equipment.

ADDITIONAL MAINTENANCE REQUIREMENTS

Effrctive date

7

AC 135-7 10/24/78 Appendix 1

FIGURE 6. EXAMPLE OPERATIONS SPECIFICATIONS - AIRCRAFT

MAINTENANCE - NINE OR LESS PASSENGERS - LISTING OF MANUFACTURERS' MAINTENANCE PROGRAMS WITH DEVIATIONS

FROM SPECIFIC OVERHAUL TIMES

UNl'TED STATES OF AMl:RtCA OEPARTMENT OF TRANSPORTATION

FIEOltRA\. AVIATION ADMINISTRATION

FIEOltRA\. AVIATION ADMINISTRATION

WA$.t11NC.TON

Form Approved. OM'S No. 04~'ft0015

Page 1 of 1 OPERATIONS SPECIFICATIONS

ABC AIR TAXI, INC. AIRCRAFT MAINTENANCE· NINE OR LESS PASSENGERS

ADDITIONAL MAINTENANCE REQUIREMENTS

CESSNA 421

lrhe Teledyne Continental Engine Model GTSI0-520C and its components, parts,

CESSNA 421

accessories and the McCauley Prope-ller Model 3AF-34C-74 installed in ABC Air Taxi, INC., Cessna 421 aircraft, shall not (except as listed below) be used in bperations under FAR Part 135 unless they are maintained in accordance with the schedule of maintenance and overhaul times set forth in Chapter 2 of the Cessna Model 421 Service Manual 0817-13 and other manufec·turei-s' manuals referenced

therein as amended.

Aircraft Engine - GTSI0-520C Propellei­ 3AF-34C-74

Overhaul

1700 hrs. 1700 hu.

~elated Pai-ts or subcomponents listed in the Cessna Service Manual that i-equii-e

overhaul will be ovei-hauled at the same aircraft time limitations specified foi­

the airci-aft engine and pi-opellei-.

Effoctive do.te

8

10/24/78 AC 135- 7 Appendix 1

FIGURE 7. EXAMPLE OPERATIONS SPECIFICATIONS - AIRCRAFT MAINTENANCE ­

FIGURE 7. EXAMPLE OPERATIONS SPECIFICATIONS - AIRCRAFT MAINTENANCE ­

NINE OR LESS PASSENGERS, ADDITIONAL MAINTENANCE REQUIREMENTS THAT ARE PART OF AN INSPECTION PROGRAM

UNDER FAR SECTION 91.217(b)(5)

UNITED STATl;;S OF AMg'.f\lCA DEPARTMENT OF TRANSPORTATION

f!'t:DER6'L AVIATION ADMINISTRATION

f!'t:DER6'L AVIATION ADMINISTRATION

Form Approved. OM'B No. O ..R007S

WASHINGTON Page 1 of 1

OPERATIONS SPECIFICATIONS

A.BC AIR TAXI, INC, AIRCRAFT MAINTENANCE - NINE OR LESS PASSENGERS

ADDITIONAL MAINTENANCE REQUIREMENTS

PIPER MODEL PA-3IT

ABC Air Taxi is authorized to utilized the check, inspection and overhaul periods

PIPER MODEL PA-3IT

that are contained in ABC Air Taxi FAA-Approved Inspection Program Manual dated 12/5/78, for each aircraft, engine, propeller and item of emergency equipment for Piper PA-3IT operated under Part 135 and listed by registration number in ABC Approved Inspection Manual in accordance with FAR Section 91.217(c).

Effective rlntl'

9