Radar Vectors
Advisory Circular Cancelled Issued Nov 9, 1970 AFS-330 3 pages Copy saved Nov 18, 2026

AC 121-16 Maintenance Certification Procedures

Provides guidance for the preparation of an Operations Specification--Preface Page which will afford nominal and reasonable relief from approved service and overhaul time limits when a part is borrowed from another operator.

This document is cancelled. It may have been replaced. Check the official source before relying on it.

Official source ↗ Open PDF

.

AC NO: AC lzl- 16 DA T E : 11/9m ADVISORY CIRCULAR

DEPARTMENT OF TRANSPORTATION FEDERAL AVlAl’lON ADMINISTRATION 4 SUBJECT: MAINTENANCE CERTIFICATION PROCEDURES

1. PURPOSE. This advisory circular provides guidance for the preparation of an Operations Specifications - Preface Page which will afford nominal and reasonable relief from approved service and overhaul time limits when a part is borrowed from another operator.

DEPARTMENT OF TRANSPORTATION FEDERAL AVlAl’lON ADMINISTRATION 4 SUBJECT: MAINTENANCE CERTIFICATION PROCEDURES

2. APPLICABILITY. The type of Operations Specifications i, PrefaFe . P-age illustrated in Appendix 1, Figure 1, and described in this advisory circular may be approved for use by Federal Aviation Regulations 121 and 127 operators.

3 . BACKGROUND. Instances have occurred where an operator in need of a

part, which was not available from his own stock, was unable to borrow one because the time in service of the available unit exceeded his (the borrower's) approved service and overhaul time limit yet did not exceed that approved for the lender.

4 0 SCOPE AND LIMITATIONS. An operator may borrow and use a part pro- vided by another operator for a maximum of 100 hours (or 50 landings if the service or overhaul time limit is controlled by the number of landings) even though the time in service of said unit exceeds his (the borrower's) approved service and overhaul time limit provided:

a. The part in question has a minimum time of 200 hours (or 100 landings if the service or overhaul time limit is controlled by the number of landings) remaining to service or overhaul in relation to the lender% approved service and overhaul time limit.

b. The part is not specifically life limited. In such a case, the part may not be operated beyond its approved life limit.

Initiated by: AFS-230

Page 2 AC 12146

l3/9p '

5 . GENERAL, The provisions of this particular preface page, when authorized, apply equally to units borrowed from parts pool by parts pool participants.

L<iting Director , Flight Standards Service Flight Standards Service

b , . .b

AC 121-16 Appendix 1 . w9 no Page 1

FIGURE 1. OPERATIONS SPECIFICATIONS - AIRCRAFT MAINTENANCE - PREFACE PAGE -

FIGURE 1. OPERATIONS SPECIFICATIONS - AIRCRAFT MAINTENANCE - PREFACE PAGE -

BORROWINGPARTS

Form Approvcii. Budgcl Rurvau No. O&ROTS. UNITED STATES OF AMERICA

FEDERAL AVIATION AGENCY EXAMPLE WASHINGTON

OPERATIONS SPECIFICATIONS XYZ AIRLINES AIRCRAFT MAINTENANCE - PREFACE PAGE BORROWING PARTS

OPERATIONS SPECIFICATIONS XYZ AIRLINES AIRCRAFT MAINTENANCE - PREFACE PAGE BORROWING PARTS

XYZ Airlines, when in need, may borrow a part from another FAR 121 or 127 operator (or from a parts pool if the operator is a participant of a parts pool agreement) and may use such part for a maximum of 100 hours (or 50 landings if the service or overhaul time limit is controlled by the number of landings) even though the time in service of such part exceeds XYZ Airlines' apptoved service and overhaul time limit providing:

a. The part in question has a minimum time of 200 hours (or 100 landings if the service or overhaul time limit is controlled by the number of landings) remaining to service or overhaul in relation to the lender's approved service and overhaul time limit.

b. The part is not specifically life limited. In such a case, the park qy nbt be operated beyond its approved service life.

.

Effective date

Form FAA-1014 (5-47,

35285